BlogHide Resteemsprojectsupercar (63)in hive-196037 • 4 years agoWhat was the Second Donor Car that gave up its Roof and Glass for my DIY Supercar: Prototype Ep30With most of the mechanical parts coming from one donor car, I realised I would have to source a second car to give up its roof and windscreen. The standard Audi A6 styling just wasn’t going to work…projectsupercar (63)in hive-196037 • 4 years agoRemoving the Glass from my Audi A6 2.7T donor car: Time-Lapse. Ep24With the water drained and the car now in my garage, I can get to work removing the glass, without breaking it…maybe? This time lapse video is just for a bit of fun. I thought you might enjoy…projectsupercar (63)in hive-196037 • 4 years agoCutting the Glass out of the Donor car: Audi 2.7 Bi-Turbo. Ep28.Well, there’s no putting it off any longer, I’m going to have to remove the glass before I can chop the roof off. Let’s hope I don’t break anything. The engine from this donor car and other parts…projectsupercar (63)in hive-196037 • 4 years agoDraining the water out of my flooded Audi A6 2.7T donor car: Time-Lapse. Ep23Wow, it hasn’t stopped raining, and I really need to get this donor car ready to be chopped up, but before I can do that I’m going to have to drain all the water out and get it in the garage. This…projectsupercar (63)in hive-196037 • 4 years agoDraining the water out of the Flooded Donor car: Audi 2.7 Bi-Turbo. Ep27.Rain stopped play for a while, but there was a break in the weather, so I think I have enough time to drain all the flood water out of the chassis, and then move this donor car into the garage ready…projectsupercar (63)in hive-196037 • 4 years agoGear change and Hand Brake Removal from my Audi A6 2.7T donor car: Time-Lapse. Ep22With the propshaft and differential removed, I think it’s time to remove the handbrake lever and cables, along with the gear change lever and linkages. This time lapse video is just for a bit of…projectsupercar (63)in hive-196037 • 4 years agoRemoving the Hand brake and Gear change: Audi 2.7 Bi-Turbo. Ep26.Well, the plan was to remove the hand brake cables and then the fuel tank, but I had to change my plans. Looks like the fuel tank will have to stay put for a little while longer. The engine from…projectsupercar (63)in hive-196037 • 4 years agoDiff and Propshaft Removal from my Audi A6 2.7T donor car: Time-Lapse. Ep21With the car now on ramps, I can remove the propshaft and differential. This time lapse video is just for a bit of fun. I thought you might enjoy watching me run around at 8 times normal speed. If…projectsupercar (63)in hive-196037 • 4 years agoRemoving the Prop Shaft and Diff (fun and games): Audi 2.7 Bi-Turbo. Ep25.With the exhaust out of the way, removing the prop shaft and differential should be easy, right? The engine from this donor car and other parts, are for my homemade Supercar. Although I have an…projectsupercar (63)in hive-196037 • 4 years agoStyling and Designing my DIY Supercar Part 2: Prototype Ep29With the car back together in the last episode, we can go over the cars that inspired this build and cover the many problems that some DIY car builders many face. Although I have an interest in…projectsupercar (63)in hive-196037 • 4 years agoStyling and Designing my DIY Supercar: Prototype Ep28After talking about how I built this car so far, I think it’s time to go over the styling and the design. But before we cover that, I think I’d better put this car back together. Although I have…projectsupercar (63)in hive-196037 • 5 years agoJack up and Exhaust Removal from my Audi A6 2.7T donor car: Time-Lapse. Ep20Before I can remove the exhaust, I need to crack the bolts loose on all four drive shafts and get the whole car up a lot higher on some ramps. This time lapse video is just for a bit of fun. I…projectsupercar (63)in hive-196037 • 5 years agoJacking up the car and pulling the exhaust (Not sketchy at all): Audi 2.7 Bi-Turbo. Ep24.It’s time I begin the strip down from underneath the car. I’ll start by removing the exhaust, but before I can even do that, I’m going to have to jack this car up into the air and get it on ramps.…projectsupercar (63)in hive-196037 • 5 years agoHow to repair your Halfords or Sealey 3 ton Trolley Jack: Quick Tech Ep3.This is a quick tech episode showing you how I replaced the leaking O-Ring seal on my Halfords 3 ton Trolley jack, which is similar to the Sealey 3 tonne jack. I need to repair this jack so I can…projectsupercar (63)in hive-196037 • 5 years agoMy channel is under attack from Copyright Scammers on YouTube.I keep getting hit with copyright scams here on YouTube. This means I have to continually take down videos, re-edit them and then upload them a second time. This video shows a new music copyright…projectsupercar (63)in hive-196037 • 5 years agoModifying the Wiring loom/Harness and Electrics on my DIY Supercar Part 2: Prototype Ep27This episode is the continuation from Part 1. In this part I explain why I need a donor wiring loom from a 4 door car, for my 2 door Supercar. Although I have an interest in kit cars, including…projectsupercar (63)in hive-196037 • 5 years agoModifying the Wiring loom/Harness and Electrics on my DIY Supercar: Prototype Ep26The original donor car for my DIY Supercar was an Audi A6. In this episode I’ll go over the many modifications I had to make to the wiring harness taken from the donor car, so it would work on the…projectsupercar (63)in hive-196037 • 5 years agoHow to remove the Rear Lights and Bumper from an Audi A6: Quick Tech Ep2.This is a quick tech episode that just details how to remove the rear light clusters and bumper from an Audi A6. If you want to know more about the Audi A6, I have more detailed video’s on my…projectsupercar (63)in hive-196037 • 5 years agoRemoving the Wiring loom/Harness from my Audi A6 2.7T donor car: Time-Lapse. Ep19Removing the complete wiring loom or harness from my Audi A6 2.7T Donor car, took over three days, here it is in just over a minute. This time lapse video is just for a bit of fun. I thought you…projectsupercar (63)in hive-196037 • 5 years agoPulling out the Wiring Loom Part 3: Audi 2.7 Bi-Turbo. Ep23.This is part 3, where we continue with the removal of the wiring loom, from this Audi A6 2.7T Quattro donor car. Will it finally be removed? The engine from this donor car and other parts, are for…
