From Freiburg (Germany), Martin’s Gate or Martinstor, one of the ancient city gates.
Hello everyone! I’ve just completed a few jobs that were absorbing me during the last weeks (mainly 3d animations and some electronic assembly for video recording and wireless transmission).
Germany, Freiburg: Martinstor
-The Place
A few months back I visited a dear friend during a weekend… he lives in Alsace, so we had the opportunity to visit Freiburg im Breisgau, a beautiful city in the Southwest part of Germany, close to France and Switzerland. Freiburg is very nice, with a beautiful historical center. It’s the ideal place where to take a walk and have a look at the stunning squares, a merchant’s hall and various gothic buildings, and the cathedral.
-The Work
The shot I used for this work has Martin’s Gate (Martinstor) as a main subject, surrounded by beautiful historical buildings. The lovely geometries of the roofs and top floors give a nice perspective and direct the eye toward the open sky…
I started from an HDR photography (single shot), so I created a few variants, each one optimized to better present a specific part of the image, in terms of lights and shadows. I then used the various parts to assemble more (and nicer) variations.
Then I experimented on each one with some filters and digital painting. This time I used a lot of different digital painting techniques, fully manual but also automated. The latter are almost always unexciting because you have basically no control on the type of strokes and direction… generating, in my opinion, patterns too “uniform” and uninteresting.
I wanted some specific effects I created during the painting. For example the lower parts of the buildings are “streaked”, following each building’s facade direction, to give a more dynamic shape. The sky at this point has a almost uniform “wormy” pattern. I wanted the clock face to look fragmented and a bit fluid, like if seen through a textured glass.
Here’s a detail of the final image (a bit less than half the final resolution). You can see different patterns and strokes all around:
I then identified all the parts I would like to have in my final image, proceeding to put them together (mostly through masking, to control how they overlap and dissolve into each other).
At this point I proceeded with the final steps… After some minor color and light corrections here and there, the lower part of the buildings needed some more darkening. I used a black painting “creeping” on them, following the painting patterns. Also the sky needed some movement through the dark/light “waves” in the middle-right. Plus some more chaotic patterns around the top and right border.
Last steps: some highlights/reflections accents on the gate rooftop. And slight modifications to all roofs’ tops to give them a twisted, more gothic and less perfect look. These also disrupt the shapes geometry and perspective alignment. I think it makes the work more interesting to look at.
And that’s all for now, I hope you’re enjoying the images and the description has been somewhat inspiring 😉