Part One: The Invisible Crucible
Microwave frequencies made possible the 50 second cup of coffee.
High-voltage electrical fields/flux allow for the lifting and carrying of SOME non-ferrous and even biological materials, without application of force by matter to their structures.
What if? ..between these two technologies await unexperimented methods which will not heat a cup of water but might be used to form/mold hot polymers and metals without need of contact to other materials.
Electric flux applies force and attracts relative the variable of object_charge being either negative or positive. Radio frequencies can excite subatomic particles based on the resonant frequency of a material. I can see metal being made molten using radio frequency while having application of electric flux to shape or hold the molten material. The invisible crucible?
There are two charge possibilities, negative and positive. All matter, objects and living organisms have a net positive, neutral or negative charge. What else might we carry and automate?
The in-fact visible "invisible crucible" would be cylinder shaped with a hemisphere at the bottom to apply the electrical flux of the container evenly to the ferrous material contained therein. The desired working height inside the cylinder is reached by increasing the flux density. In theory the material should be held at the desired height while a radio frequency emitter can heat (excite) the suspended material.
The weight and type of material can be entered into a computer which applies and either increases or decreases flux density (so materials do not come out of the crucible attempting manual adjustments).
It would either be an ingenious device or a terrible mess.
Part Two: The Levitating Trichomes
Neutrons have no charge bias either negative nor positive which allows them more unobstructed space as they move through matter at the subatomic level. This demonstrates underlying properties of matter and energy that we can apply to perform work by emitting forces of electric flux. Like the Maglev train technology with the inclusion of materials other than metals which must react to the influence of an electric field as though it were "solid" matter. Static moves many objects, most of which are non-ferrous nor metallic.
The magnitude of charge bias for object X in relation to it's mass determines the density of complementary electric flux required to counter the force of gravity. How static performs unintended work upon objects which are non-ferrous nor metallic.
It means that a real "tractor beam" (attractor) would need to produce a complementary electric flux of greater density for a human body than an object which has a greater positive/negative charge bias. There are at least two different "beams" for attracting and repelling matter, negative and positive. A negatively charged object can be attracted by positive flux and repelled by a negative, maybe both at the same time?
Who knew?? ..I have a miniature tractor beam in my kitchen because we know it performs work attracting and carrying biological material (trichome heads and stalks). There exists a patent for the technology, I just never let myself consider the device very similar to the well known science fiction tractor beam.
What the electric flux cannot lift, radio frequency can be used to excite the particles of matter to induce a charge bias where an object had none or too little charge bias for the electric flux density to counter the force of gravity upon the object to be lifted.
The "attractor beam" flux density could be programmed to reduce flux density as the object nears the source of attraction. Oppositely charged flux can be applied alongside the complementary flux as a secondary programmable damping.
Both trichome heads and stalks consist of wax structures, in the case of heads they contain biosynthesized compounds which seem to be the only material difference between stalks and heads. There is also the factor of shape which may influence the orientation of the objects carried by their charge bias.
I am exploring the theory surrounding the real phenomena which might take a simple refinement technology in other useful and ethical directions. This is helping me elaborate the conceptualization necessary to scientifically explain the mechanisms of the process.
We have long lifted metals using electro magnetic fields ..as far as I know this is a first for deliberate lifting of biological materials.
The flux is the invisible but present direction of force expressed by magnitude of charge. The field expressed by a charged material is flux expressed in relation to the shape of the charged object.
Why are many ethical applications for electric flux and frequencies not yet discovered or exploited? ..the people who were responsible for scientific endeavours which discovered and defined the most advanced radio frequency and high-voltage technologies were tasked and concerned with national defense problems during world war two. Much of their wartime work still stands true and in some cases remain the pinnacle of knowledge in fields such as mathematics and cryptography. We still rely very much upon their formulae and logical constructs.
Oh MY LorD!! ..I can build this experiment for five dollars at the hardware store. The invisible crucible first applied to levitating and laterally stabilizing trichome heads or stalks (no radio frequency for trichomes) rather than molten metal. An electrically conductive copper cylinder and an end cap to replace the hemisphere which was the first design choice. I believe the effect should be quite similar with a hemisphere or flat electric flux emitting copper endcap.
Will the trichomes (biological material) be expelled from the copper cylinder? ..or will the variable high-voltage supply permit the fine control of material height within the flux-emitting cylinder with capped bottom expressing the upward force?
Would it be great if could control the height of the levitating material using the flux density potentiometer (knob adjustment)? ..I have to see this configuration of components and the "Levitating Trichomes".
They told me not to sit like that but I meditated anyway, I have yet to levitate myself but the objects around me will have if the experiment returns an affirmative result.
I will share photos or video of the conclusion, actually I should do as with the other patented technologies by filming and sharing the very first attempt/experiment. Of course I begin from a conceptualization of a method which should work according to forethought.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit