Glove-Box Installation For Stealth Water Methanol Injection - [SH2OMI] - Update 17.02.2018

in cars •  7 years ago 

artist.jpg


Hello fellow Steem Meisters,

Another busy day here at Egg HQ where I've just spent a couple of hours tweaking the wiring for the boost gauge and switch gear. I've had to try several attempts of routing the wiring so that the unit can fit as flush as possible to the inside far corner of the glove-box. I've also had to drill out several holes to also allow for the a better fit. A large one (a) for the top of the boost gauge, two on either side for the gauge bracket (b & c), one for the boost pipe/electric wiring (d) and a final couple of small ones (e) to feed a tie-wrap through the boost gauge bracket to hold the unit in situ.

tidied up the wiring
20180217_154811.jpg

removed upper glove-box and drilled holes
20180217_154900.jpg

you can just see the boost pipe hose connector
20180217_155134.jpg

cheeky tie-wrap to hold unit in place
20180217_155606.jpg
20180217_155628.jpg

test fit
20180217_155019.jpg

I might source some black self-adhesive foam cushioning to place around the back-side edge of the unit to help prevent light escaping from the rear of the unit when the bright orange 'active' LED is on.


More to follow...

EggMeister

shomi3.png

All previous posts on the SH2OMI project can be found below:

https://steemit.com/cars/@eggmeister/8swbskan

https://steemit.com/cars/@eggmeister/supplemental-update-to-diy-stealth-water-methanol-injection-boost-gauge-switch-panel-update-sh2omi

https://steemit.com/cars/@eggmeister/btxnk2px

https://steemit.com/cars/@eggmeister/diy-stealth-water-methanol-injection-system-sh2omi-update-06-02-18

https://steemit.com/cars/@eggmeister/diy-stealth-water-methanol-injection-system-sh2omi-update-28-01-18

https://steemit.com/cars/@eggmeister/a-follow-up-post-to-a-question-guys-electrical-expertise-required-diy-sh2omi

https://steemit.com/cars/@eggmeister/a-question-guys-electrical-expertise-required-diy-sh2omi

https://steemit.com/cars/@eggmeister/it-s-not-a-bomb-diy-stealth-water-methanol-injection-system-sh2omi-update-15-01-18

https://steemit.com/cars/@eggmeister/diy-stealth-water-methanol-injection-system-sh2omi-update-14-01-18

https://steemit.com/cars/@eggmeister/new-video-part-2-diy-stealth-water-methanol-injection-system-sh2omi-update-12-01-18

https://steemit.com/cars/@eggmeister/new-video-diy-stealth-water-methanol-injection-system-sh2omi-update-6-01-18

https://steemit.com/cars/@eggmeister/increasing-power-diy-water-methanol-kit-sketches-and-musings

https://steemit.com/cars/@eggmeister/more-power-water-methanol-injection-product-placement

https://steemit.com/cars/@eggmeister/sh2omi-should-i-diy-stealth-water-methanol-injection-system


footer2.png

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
Sort Order:  

Coming along nicely!

Cheers Mike :)

beautiful

Thank you :)