We have the rear speakers installed now we're going to work on the front so we're going to go ahead and take off the door panel on both sides figure out what we got to work with and go ahead and get everything put in so since these figures are held in with rivets we'll have to drill out the rivets by using the drill in just a regular drill bit so as you can see this is probably a good reason why our sound quality isn't that great another top quality speaker virtually no magnets probably Car Window Tint Colorado Springs
but not very good here's our new offer from our component set here's the original woofer the body of the woofer is actually the chassis of the woofer - so the mounting points everything is integrated into one piece so as we did with the back we had to make mounting plates it looks like we're going to have to do the exact same thing here I mean we could kind of work something up with just a regular speaker adapter but it looks like we should probably make these out of 3/4 inch MDF as this entire enclosure is about an inch tall.
car window tint near me, tint near me, window tint near me, car tint near me, window tinting, window tinting near me, car window tinting near me, car window tint film, car window tint percentages, types of car window tint, how much does it cost to get windows tinted
And you can see the difference here we'll go ahead and wrap and set up the router create an a whole new set of plates that way they mount right in will dine them at the door install the tweeter to make our mounting rings we're just going to go ahead and trace out the shape rough cut it with a jig saw use template tape to attach the piece of wood to the speaker and route it out you now that we finished our rings before we can go any further we have to figure out what we're going to do with the tweeters the Kenwood stock tweeter comes in a swivel mount type mechanism the stock tweeter as you can see is not very very high quality but just so happens to be the exact same size as the Kenwood tweeter once you take it out of its housing and it will even pop right in to the factory housing so we're going to go ahead and install the tweeter then what we'll do is Dynamat this left portion of the door with just a single sheet mount our blocks mount the Car Window Tint Pueblo and we should be good so you can see that Kenwood tweeter was actually able to snap directly into the stock location.
Our Locations In Google Maps
Colorado Springs, Motor City: https://goo.gl/maps/QNvF6rdbqXzpg9nK9
Colorado Springs, CHAPEL HILLS: https://goo.gl/maps/71FztMqjbGufgs57A
Colorado Springs, POWERS & BARNES: https://goo.gl/maps/AGMz7Ac5F9avUNWQ9
Pueblo, PUEBLO: https://goo.gl/maps/gibBR8wtyFcr41fJ6
What we will do is put a little bit of epoxy on there to prevent it from backing out it's not completely firm like the factory 2 years so we don't want it to pop out so we'll just put a little bit of epoxy mesh so in order for us to put Dynamat in this area will actually need to peel back the factory vapor barrier and then we'll lay our Dynamat put the vapor barrier right over it you know that we've had a chance to cut out the speaker we have the circular piece that was then cut out we'll go ahead and apply it directly behind the speaker there are other materials that you can use specifically there are some mats made specifically for standing waves but we're trying to keep our cost down.
Some Common Questions Come to Drive-In AutoParts Colorado Springs, Pueblo, USA?
Do cars look better with tinted windows?
What does 30 percent window tint look like?
How much is a tint ticket?
Can I roll my windows down after 2 days?
Can you wash the car after the window tint?
Why can't you roll down tinted windows?
What percent tint is legal?
Is 30 percent tint dark?
How long does tint last on a car window?
Is it good to tint your car windows?
Which tint is best for a car?
What is the darkest legal tint for a car?