Building my Cryptocurrency Mining Rig

Watch Building my Cryptocurrency Mining Rig video on DTube

---

You can use this rig to Mine anything that uses a GPU - Find a list here of what will give you the best return for your mining power. Currently Ethereum and Musicoin provide the best returns at the time of writing this post.

Find my full guide on steemit at the below link.

https://steemit.com/cryptocurrency/@simonsayz/building-my-eth-aluminium-mining-rig-construction-video-and-guide

Materials Required:

The materials to use per rig case - will hold up to 6 x GPU's

2x pieces of 3 Metre Moulding Aluminium Angle 20x20x1.5mm - cost approx $32.00 AUD *each rig only uses 5 metres, so you will have some left

1x piece of Pine Dar 18x18mm 2.7 metre in length - cost approx $5 AUD

1 box of Self Drilling Screws - I used Zenith Metal Button Head Phillips Drive 8G x 12mm *35 screws in the pack - cost approx $4 AUD

I also use some masking tape to reduce the rough edges of my cuts and I cut with a hacksaw.

Cut Aluminium lengths to:
4 x 55cm
4 x 35cm
4 x 30cm

Cut Wood lengths to:
5 x 35cm
1 x 55cm

Apologies - I wasn't aware that this would repost on my own steemit wall.