Earthquake Resistant Building Concrete
A good quality earthquake resistant building should not only be built in earthquake prone areas. The death toll in earthquake disaster is usually caused by the victim struck by building material, therefore there is a need for good building quality
How are earthquake resistant building standards good?
Building anti or earthquake resistant is a building that has a construction or building structure with good strength. Buildings like this are expected to survive from earthquakes up to 7 on the Richter scale. If the earthquake that occurred has a power exceeding 7 Richter scale then later expected the building does not immediately collapsed just like that. But the building is expected to collapse but will collapse slowly to give time to the people in it to save themselves
Basically to make a building that is earthquake resistant then the building structure must be made symmetrically. It has been proven that symmetrical buildings have more power than those that are not symmetrical. Aesthetic value of a building is important to beautify the building, but more important is to pay attention to the strength of the structure of the building
Building materials such as mild steel and mortar cement are earthquake resistant building materials. Therefore if you are going to make any building now should use the building materials as light as possible. This is because the lightweight construction material is a requirement for the building to be earthquake resistant building. Lightweight steel is also suitable for building materials on a small building pole
Earthquake Resistant Building Principles
A building can be said to be earthquake resistant if the building responds to earthquakes that occur with the nature of dakilitas that can survive from collapse and flexibility to dampen the vibration during an earthquake
General Characteristics of Earthquake Resistant Building
The structure has a dynamic earthquake-style retaining system
Strength of a good earthquake-resistant system
The configuration of the structure is eligible for earthquake resistant building purposes
To create a building that is resistant to earthquake then need to pay attention to the following:
Foundation
Foundation building is the most important part of the building because this foundation serves to funnel the building load to the ground. Therefore the foundation of the building must be built on hard ground and should not be soft. The foundation of this building should at least have a depth of 60 to 75 cm depending on the building to be made
Rock mounts to be installed as a foundation should also be installed after the soil is covered and hardened. After the soil is really hard then can be foundry to the foundation. In the construction of buildings, the architects will ensure the strength of the foundation using a concrete hardness test or so-called hardness tester. This will ensure the strength of the concrete foundation accurately
Concrete
This concrete is the most common part of the building where concrete can be made using a mixture of sand (fine aggregates, gravels (coarse aggregates) stirred with water and cement
Reinforced concrete
In addition to that, in making a house that is resistant to earthquakes also need to ensure the manufacture of reinforced concrete. The working and quality of reinforced concrete is a thing to be ensured to protect the iron from outside influences as well as corrosion
Okay friends Steemit, so my discussion for earthquake resistant building materials. See you in the next post
Thank you
Regards Steemit .....
COME TOGETHER ME WITH MORE HELPS ASSISTED TO IMAGINE
@farizsteem
This post has received a 3.13 % upvote from @drotto thanks to: @fariz.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit