Ethereum Mining Rx 480 Gaming X 8g 8gb and Armor 8g 8gb With Advanced Claymore Settings

These are some Claymore settings for RX 480's. The rig is currently running a mix of Rx 470 gaming x 8g 8gb and Armor 8g 8gb cards.

The miner is running windows 8, Claymore Version 10, and the latest AMD Mining drivers. The mining drivers made a HUGE difference. Download the drivers here. http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx
I got 27 Mh/s for each Armor card and 27 Mh/s out of the Gaming X card. I get about 4x that hashing power with DCR dual mining.

-cclock 1100, 1100, 1100, 1100
-mclock 2050, 1900, 1900, 2050
-cvddc 850, 850, 850, 850
I normally set mvddc, but it didn't work with this rig for some reason.

mclock 2050 is for the Armor cards and the 1900 is for the Gaming X cards.
If you have stability issues, lower mclock by 50 at a time until it's stable.

-asm 1 (See Calymore readme. 1 is the best option for the 480's)
-dcri 4 (This increases Alt coin mining. These cards do not dual mine that well. I wouldn't set this beyond 4.)
-mode 0
-ethi 16 (This takes gpu power away from Windows and applies it to mining)
-tstop 85 (This stops the miner if it a card reaches 85 degrees Celsius)
-tt 75 (This is the target gpu temperature. You want it low enough to not damage the card, but high enough to not overwork your fans)
-fanmin 30 (This is to keep the fans from turning off and on. my fans still stop sometimes)
-fanmax 100 (Allows the fan to reach 100%. Not really a necessary setting)
-ttdcr 83 (This tunes down my alt coin DCR mining if the cards reach 83 degrees Celsius)
-minspeed 60 (This restarts claymore if the total Mh/s goes below 60 Mh/s)
-powlim -30, -30, -30, -30 ( This lowers the amount of power that goes to each card. This setting saves a ton of money, you want to go as low as possible)
-r 1 (This restarts the entire miner if a gpu fails. See Claymore's Readme. you'll need to create a reboot.bat file)
-mport -3333 (This is for remote management. I dont really use this)
-esm 0 (Eth proxy mode. 0 is best for nanopool and dwarfpool. If you're having issues with your pool, this might be why)
-gser 2 (This buffers the ram before you start mining. I was able to push my cards much harder after applying this setting)
-allpools 1 (this has to do with devpool mining, which is your dev fee. If your devpool mining isn't working, it'll stop your entire miner)
-allcoins -1 (This allows you to mine Ethereum forks by setting the epoch for you. The disadvantage is that it starts the miner by first mining your dev fee.)

Tips can be sent here.
BTC: 1MdDeu9foDHDjpQvpMvPpPVswrrPYA2DqY
DCR: DsaJuXdZ5XiAaQLn9krPPX94PCdNdZ4xydM
Eth: 0x4b8602fefb0434220c524c4a238a8fc85427e838