Guide to Volumetric Dosing - for substances that are just too potent to eyeball (specifically Etizolam in this guide) (OC)

Alright, as an attempt at harm prevention, considering the low low dose of these powder thieno/benzos, here is a simple way to use volumetric dosing to your advantage, so all you kids pay attention and you won't do something foolish!

firstly, the supplies needed:

-graduated cylinder that preferably measure by 10ml intervals, an example of mine can be seen above

-Everclear: my first choice for ethanol source, but perhaps 151 would work just as well.

-50ml vial if you'd like to follow this guide without upscaling.

-funnel with small hole (ensure it's completely dry prior to using as powder will stick to the sides otherwise.

-optional, but suggested is a insulin syringe with the needle removed via needlenose pliers.

Procedure:

1. place your funnel inside the top of your vial

1. pour your weighed amount of Etizolam (mine being 250mg) into the funnel and flick the funnel if needed to get the loose powder to fall into the vial (be careful, don't knock your vial OVER, so don't attempt this if you're fucked up already, you'll regret when it spills on the floor

3)Fill your graduated cylinder (on a level surface) with 50ml of Ethanol (everclear)

4)Pour your ethanol through the funnel into your vial (a cloudy solution is expected at first

1. cap the vial, ensuring it is a tight seal, then let it sit submerged in a hot water bath until the vial becomes noticeably warm to the touch.

at this point you maybe swirl the solution around inside the vials and it will now be completely clear and well dissolved.

---

and now for the dosing method i prefer:

1. get a non-used insulin syringe or pipette with ml makers, or order a luer-lock syringe with flat tip needles to avoid poking yourself (for the clumsy)

Use this to easily see how many units of a 1ml/1cc syringe you are about to dose.

draw as much as you'd like to consume and squirt it in your favorite drink, coca-cola in my case

---

---

---

So here's the math.

I added 250mg of Etizolam freebase to 50ml of ethanol, therefore 1ml/1cc of solution should be 5mg of etizolam.

I think 5mg is high, but that's the point.

If you want to just do 1mg of etizolam for example, simply draw up 20units in the 1cc syringe.

if you're like me, just throw a whole ml into your drink and get fun :laugh:

anyway, hope this helped fellas!