Today, aquatic drifting feed maker modern technology is preferred in the manufacturing of aquafeeds, as it can be used to produce a variety of feeds, whether floating or sinking, depending on the requirements of each species. In addition, the extruded feed made by water floating feed device has less deterioration and also high effectiveness, helping to enhance digestibility.
During the marine drifting feed device extrusion procedure, devices such as temperature level, humidity, stress will boost starch gelatinization, decay and soften the cell wall and also release some conveniently digestible substances, hence promoting the digestion as well as absorption of farmed animals.
Through water floating feed machine extrusion modern technology, it is feasible to prevent certain protease preventions (such as antitrypsin), ruin microorganisms in resources or modification healthy protein homes to further boost the contact with enzymes in fish and also shrimp, helping to digest food more conveniently.
Related post: Fish Feed Factory Cost
Extruded feed made by marine floating feed device can control the web content of compounds as well as help far better detoxing. At the same time, the longer stabilization time in the water (12-36 hours) assists farmers to observe and also regulate the feeding schedule.
Although extruded feed made by floating fish feed making equipment has noticeable benefits over pelleted feed, the initial investment price of extruded feed production is greater, causing greater feed expenses.
But for premium fish farming, an increasing number of individuals are taking notice of the market prospect of premium fish feed.
- Highlight of marine floating feed machine.
Feeding, rotating cutting, and major drive all take on regularity conversion speed policy system, which has strong power, steady procedure, power conserving, high water production efficiency, resilient equipment, reduced failure rate, and hassle-free operation as well as maintenance.
The screw of drifting feed equipment is made of alloy material by special procedure, the service life is 3-4 times longer than that of residential similar makers, and also the price of creating feed is reduced; the fractional combined screw is suitable for a wide range of basic materials as well as even more varied items.
Automatic lubrication system of the drifting feed device minimizes power consumption as well as lengthens service life.
Related post: https://www.richipelletmachine.com/fish-feed-factory/
The feeding system embraces spiral forced feeding, and also the feeding is consistent and also vast. It can be outfitted with an automated feeding system. The feeder is a screw communicating variable regularity speed control to readjust the feeding total up to manage the blowing output (quantitative feeding, as well as can efficiently protect against the material from arching).
Straight bearing tool modification system, readjust the tool precisely as well as promptly.
The twin-screw of floating feed machine has self-cleaning function, as well as making use of devices is much more sensible and hassle-free.
Update the setup of various tools innovation and also devices to make the result of the twin-screw drifting feed equipment bigger.
Various screws and also length-diameter ratios can satisfy different manufacturing processes.
Visual automated temperature level control system to make temperature control much more intuitive as well as criteria extra exact.
The general drifting feed device setup The procedure of the fish feed pellet extruder is much more intuitive and also the upkeep is more convenient.
Dry blowing procedure takes on self-heating technique without heavy steam system, which is much more in accordance with the actual demands of individuals.
No adhesive is needed to refine the floating feed, and also it can preserve security in water for greater than 12 hrs.
Little and also average tools is specifically ideal for scientific research study establishments, unique reproduction ranches or medium and small feed factories. There are also particularly personalized experimental twin-screw drifting feed equipments available for scientific research study units.
Related post: floating fish feed extruder machine
- The distinction in between pellet feed and squeezed out feed.
With the advancement of the drifting fish feed handling industry, two extensively made use of innovations presently used to generate aquafeed are pelleting as well as extrusion by drifting feed equipment. Contrasted to natural baits, such feeds have greater dietary material and security, much less moisture, less complicated storage space, less microorganisms, as well as longer storage space times.
Pelletizing by floating feed maker is a strategy of compressing tiny pellets of raw material into larger pellets, during which humidity, temperature and also stress can substantially affect the quality of the feed.
Among the main benefits of pelleted feed is reduced manufacturing expenses. Nonetheless, it has some disadvantages.
One of the most significant downsides of pelleted feed is that it sinks faster as well as dissolves quickly in water (according to data, regarding 10-15% of feed is wasted), which suggests higher feed costs, lower farming revenues, and also easier cause water contamination.
- Pick pellet feed or extruded feed?
Farmers, choose pellet feed or extruded feed?
When choosing feed, farmers need to take into consideration the features of different aquatic varieties and also feeding practices. Since the routine of shrimps as well as crabs is to locate food near the bottom, and then consume the food gradually, so the food needs to not be too difficult as well as not easily soluble in water.
As a result, extruded sediment by drifting feed maker is the best choice due to the fact that it is soft and also challenging to dissolve in water, and it is convenient for shrimp and crab to eat, lowering feed waste and also decreasing water air pollution.
Especially in extensive shrimp farming, squeezed out feed ought to be dominant, since it is simpler for shrimp to digest healthy protein from extruded feed, which lessens feed waste and promotes far better protein absorption.
At the same time, we can also boost the absorption rate of the feed by adding advantageous microbes or boosting digestion products to the feed.
Nevertheless, from a lasting point of view, using extruded feed, which is made by floating feed machine will enhance the price, as well as if the fish use squeezed out feed in the mature duration, it may cause fish fat, large belly, inadequate stress capability, not appropriate for long-distance transportation, etc, resulting in a affordable price at the time of sale.
For that reason, in the process of aquaculture, when several farmers use feed, they commonly make use of a combination of pellet feed and also squeezed out feed, which not just controls water high quality, reduces feed deposits, yet also improves performance as well as financial benefits.
At the same time, the tank farming industry is promoting the further advancement of the two feeds because of their respective advantages.
- Setup of drifting feed device.
( 1) Installation of drifting feed maker pipe rack.
The selection of the setup position of the pipeline rack depends on the site place, however it needs to not be too far from the primary engine. Much from the major engine will trigger waste of products during pipeline connection on the one hand, as well as cause the hysteresis of the control system on the other hand.
If the installment area on website permits, the most effective setting of the pipe shelf is to be directly behind the primary engine as well as conditioner, parallel to the main engine, as well as about 1 meter far from the major engine (there is a specific maintenance room), while guaranteeing that the pipeline shelf is changed upwards. The placement of the heavy steam line interface of the conditioner is on the side of the conditioner.
In order to facilitate the cleansing of the ground and the discharge of drainage in the future, the pipe shelf should be increased by around 10 centimeters during installation. In the installment of each shutoff in the pipeline, the placement of the valve wheel should meet the needs of hassle-free procedure for floating feed device.
( 2) Setup of drifting feed machine control box.
In order to assist in the procedure, the installment position of the on-site control box should be chosen near the bypass, as well as a particular space must be scheduled between the bypass and also the control box to momentarily put the wastes flowing from the bypass.
The range between the frequency converter of the cutting motor as well as the rotating positioner of the on-site cutter ought to not be too much. It is regulated by voltage. If the distance is too far, it will trigger voltage variations and also affect the cutting effect.
The circulating temperature level display screen instrument on the on-site control box is to present the temperature of each end of the puffing cavity in real time, and also the shown temperature sequence has certain needs. Area 2 Expansion dental caries ... up until the product discharge expansion cavity, this series needs to be paid attention to when electrical wiring the electric control.
In addition, there are 4 nozzles on the water inlet pipe of the dual-shaft differential conditioner of floating feed machine. They manage the opening of each nozzle through the electro-magnetic cut-off shutoff.
The drifting feed equipment conditioner inlet nozzle switches 1 to 4 on the control box correspond to the conditioners The first nozzle to the 4th nozzle from the feed end.
For details please contact: Pelleting Machine
WhatsApp：86 138 3838 9622
Email：[email protected]