Share your Daily Work. (Week-03)

in hive-117276 •  5 months ago  (edited)

Assalamualaikum Everyone. I am @imranhassan
From #Bangladesh

How are you all? I hope you are well By the grace of God, I am also well today I am organized by Steem4 Professionals community, managed by @shiftitamanna, madam 📢📢 Contest : Share your Daily Work. (Week-03). Thank you, @shiftitamanna madam for organizing such a lovely Share your Daily Work contest and through this contest, I will be making a small mini charger fan ordered online on a low budget. And I'll show you what parts I used here and explain each picture and word. And thank you again for organizing such a nice contest and I am going to start my post.

Steem4Professionals @Imranhassan (2).png

Edited with Canva.

Step -01

image.png

image.png

First, I ordered a small mini fan from the Daraz online shop, and it didn't come complete. You have to get the fittings done when you get it. As I am a small electrician, I understand a lot of work, so I order them online and make them at home. I used here a charger box and a stand to mount the motor, a minute switch to turn the fan on and off, a battery of 3.7 volts and 3.7 volts to charge the battery, an autocut circuit, and some thin wires.

Step -02

image.png

image.png

I then modified and locked the small motor inside the stand with a tie clip so the fan wouldn't move. Then I attached the fan to the fan.

Step -03

image.png

image.png

Then, using a red wire and a blue wire to check the positive and negative sides of the motor, I soldered with a soldering iron. Then I brought two of them out of the box through the stand to connect to the circuit.

Step -04

image.png

image.png

Then, on the 3.7-volt charger circuit, I drilled two holes above the fan and fitted it here with tie clips. And 3.7 volts through a red and blue wire soldering plastic through two holes in the inside of the box to connect to the battery.

Step 05

image.png

image.png

Then the two wires from the motor and the two wires from the 3.7-volt circuit I connected to the battery, and one wire I connected to the switch here that would work to turn the fan on and off.

Step -06

image.png

image.png

Then, when the whole fan was complete, I tested the fan by running it for a long time, put the fan on the charger, charged it, and everything was fine. Then I handed over the fan to someone because a man asked me for a small fan, and I gave it to him.

imranhassan (1).gif

🟩 Thank you for reading my post and giving your valuable time. Stay well and stay healthy. God bless you. 🟩

I have invited three active friends of mine.

@mamun442390 @grambangla @nooruleman

Photography Details

📱Device
Walton Xanon x90
📍Location
Narayanganj, Bangladesh
📷Captured By
@imranhassan

cyxkEVqiiLy2ofdgrJNxeZC3WCHPBwR7MjUDzY4kBNr81MCP6ugX7yWeWcxn2MMsarjSzWcGL9XMAFbMkct8JgtxUx5PHU4YyDK9gKnaafXk3NoHgGZH4AU3GBcwTNZiEj7.gifcyxkEVqiiLy2ofdgrJNxeZC3WCHPBwR7MjUDzY4kBNr81MCP6ugX7yWeWcxn2MMsarjSzWcGL9XMAFbMkct8JgtxUx5PHU4YyDK9gKnaafXk3NoHgGZH4AU3GBcwTNZiEj7.gif


◦•●◉✿ Thank's Everyone ✿◉●•◦

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
Sort Order:  

TEAM 3
: Congratulations! This post has been voted through steemcurator05. We support quality posts and good comments.

center ## Additional notes center pdiv class=text-justify - We reserve the right to skip curation for accountsarticles that are suspicious or hateful or controversial. - We reserve the right to gr (2).png

Curated by : @shiftitamanna
Loading...