I lay the fabric into two then i marked her gown length measurement any her hip measurement , half length measurement . Then I marked her hip measurement which is 47 then I divide it by 4 which gave me 12 inches then I put 2 inches for allowance , the next thing bis to marked the half length measurement her half waist measurement is 43 so I marked 43 then I divide it by 4 then I marked it and add allowance after that I minute 5 inches from the hip and have the knee length measurement then I add 2 inches for sewing allowance then I started at the knee length and give a slice shape then I cut it out

the back

I folded the material into two I marked zip allowance two inches then I place the front ontop of the material then I started from the knee length and slide a shape then I cut it out

the upper side

I folded the fabric into two then I marked shoulder measurement her shoulder measurement is 16>so I marked 16 inches and divide it by 2 then I marked bust measurement so I marked 4 inches for the dart then I marked 3 and 5 then I connect the middle and link it to the 5 inches then I connect the side and link it to 3 then I cut it out

the flare

I folded the clothes into four then I give a curve shape then I cut it out

I join cut a linning and neated the edges of the material then I run a straight stitches then I great a bottom hole as you can see in the picture below

I join the upper side with the down side together then I join the flare at the side as you can see in the picture below

I join zip at the back of the dress then I do some finishing

After I done with the finishing I iron it , this is the finish result