Greetings to you friends welcome to my today tutorials, today I will show you all step by step on how to cut and sew this beautiful flare gown

measurement

Shoulder bust	10
Shoulder under bust	14
bust	42
half length	17
half length waist	33
gown length	45
selves length	11
round selves	16

I folded the material into 4 then I folded it in a trangle form then I marked her shoulder measurement, her shoulder is 10 so I divide it by 2 which gave me 10 inches then I add 1 inches for allowance then I marked her gown length 47 then I 2 inches for allowance the next thing is to mark the bust, under bust, half length and hip point then I marked their measurement and connect them together and cut bit out

the back

I folded the material into four then I place the front on top of the material then I cut it out, the next thing to do is to sew the dress I join the l
Shoulder together that is the front and back then i place them together and take their measurement the neck thing is to shape it to her measurement then I strim the harmhole then I fixed the hand as you can see in the picture below

the neck

I measured the neck, her neck measurement is 18 so I divide it by 2 which gave 9 then I use a paper gum to cut the neck

I use the paper gum and measure the neck then I cut it after that I places it on the material and use iron and gum then I cut the extra out then I use iron I iron the remaining one than I iron it to the material as you can see in the picture below

Then I cut the second one and gum on the fabric then I iron the two of them as you can see in the picture below

Then I turn two them in a positive side then I put a zip at the back and fixed the collar as you can see in the picture below

Then I put the zip at the back then I iron it, this is the finish result