HOW TO SEW PANT AND NECK TIE BRA BY @idyjah

Hello everyone , how was your day Hope you are doing good.
Today I want to show how cut and sew neck tie bra and pant.

HOW TO DO IT
First, get your fabric ready, your tape ,and your chalk and your scissor ready then place your fabric on the table and take the measurement. From up to down take 11inch and put extra 1.5inch and also put 1inch allowance for elastic as you can see in that pictures.

After that you measure from where you have your 11inch from up measure 3inch and by the side you measure 1.5inch to 2inch then you draw line from where you have your 1.5inch to 2inch to where you have your 3inch to give you the shape as you can see in that pictures.

THE BACK
Use the front side and place on the fabric to have the back side then at the back side put extra 2inch allowance so that it will not be tight. After cutting back and front you can now measure from the front side 4inch and cut it out, cut another same to use as lining after that you can now join both the back and front together. And here is the pant.

NOW FOR BRA

I have my fabric place on the table I fold it into to have the triangular shape. This is what am taking about.

After that I measure 8.5inch from up I now cut it out all I need is 4piece,all should be the same side.
I also cut long strap that I will use to do ropes I now sew them together after turning everything I join the both side together to have my neck bra tie as you can see in that pictures.