_{Background Image Source- Canva.com}

Hello guys.

Nice to be a new member of this community. First of all, I want to say that this is my first article. Today I am preparing to make a useful device for us to disconnect electricity which is very important these days.

Electricity disconnection is a big loss for us and we need electricity. So I came up with a great solution for it. I will teach you how to create a device that supplies electricity to the home with the help of a UPS removed from the computer.

In case of power outage, this inverter can provide electricity to the whole house. All we need to create this is a car battery and a computer UPS. Several electrical appliances in the house can be turned on by this inverter. You can get electricity from a small car battery for about 8 hours a day. By using a bigger battery, we can increase the time we get electricity. Without further ado, I'll show you how to do it right.

Let's see what ingredients are needed to create.

---

---

Let's see how to create.

---

• Unplug the UPS first. After unpacking, remove the small battery inside the UPS. Keep the two battery wires separate. When we work with the inverter, because the time is longer, the possibility of the inverter getting hot increases, so we need to use a fan for it. It is appropriate to use a small fan available in computers. Therefore, cut a small box in front of the UPS to the size of the fan.

---

_{2022 @donhal. All rights reserved.}

• Set the fan on the cut part of the UPS. Get another 12v charger to power the fan. Connect the charger to the wires of the fan. After connecting it, turn the fan on the UPS. Set the fan so that the air of the fan is sent out. Tighten the fan well with the screws of the UPS where the fan is set. Connect the charger to the out of the UPS to power the fan.

---

_{2022 @donhal. All rights reserved.}

• To connect the UPS to the battery, two battery clicks must be connected to the wire. Glue the two clips to the two battery ends of the UPs well. Do not wire the two clips too far from the UPS to the battery. After connecting the two terminals, turn off the UPS. Seal it well and pinch it. Keep the charger fixed on the Out side of the UPS. Connect a wire to that Out side and prepare the wire to power your light bulbs.

---

_{2022 @donhal. All rights reserved.}

• We can make it like this. Then take the car battery. Connect the red and black terminals of the battery and turn on the UPS. You can then get electricity. In this way, you can use two wires to turn off the trip switch in your house and connect the two wires of this inverter to a switch that receives electricity and get electricity for the whole house. In this way, you can increase the number of hours of electricity per ampere of the battery.

_{2022 @donhal. All rights reserved.}

You can get electricity for your whole house in this way. See you in another post like this. God bless.

Thank you