Hello my dear steemian friends,
Assalamu Alaikum.
I am @saifuddinmahmud from Bangladesh. I am writing about my diary game. I am sharing with all of you.
Going office
It is now half past ten at night and I have finished my dinner.My night duty from today so I completed dinner and dressed and got ready then I left home to go to duty.It will take me 20 minutes to come from home to office I did office attendance entry and entered office.
Office time
After entering the office I understood all my responsibilities and I understood all the tasks under me and explained this responsibility to others.I boarded all the electrical panels and checked that everything is fine. I started the production system.
Production time
Production is going on. Production is in progress Crane operator collects scrap from scrap field and feeds it into furnace. It can hold about 20-25 tonnes of scrap. The scraps are melted by induction furnace. Its take about 2-3 hours time to melting the scrap. Smoke produced during scrap melting is collected in an air pollution chamber. The carbon from the smoke is collected through the filter bag and the filtered smoke is sent out.
Working time
After the production started, the workers started at their own place. They are gearing up their machines to get the billet out of the melt well. Checking for any kind of problem. Any kind of mistake can hamper the production so they are carefully preparing the machines.Three to four people work to operate and monitor each machine. Those who always try to manage more and more correctly.They always try to ensure that there is no damage to the production.
Troubleshooting time
A problem occurred with the water pressure indicator during production. Due to the problem, the water pressure was not showing properly. So I was wondering what the problem was.After some observation I found the problem was a setting problem. There was a parameter problem with the pressure indicator meter. A parameter was not giving correct reading I re-set the parameter. And started the machine now the problem is solved and the water pressure is showing ok. I solved the problem successfully.
Now my duty is going on so I am concentrating on my other work. Good night everyone.
Thanka to my steemian friends who read my post.