I am getting the print repaired from the shopkeeper. (1008 Days)

Mobile Photograhy

My dear friends, you are welcome here. I have three printers but all three suddenly break down and the problem increases. The first printer I had was a laser which broke down and the bearing near the motor and the motor both fell off. I thought I would be able to get it after a few days but winter came due to which my hands were not working and it was getting very cold, so the problem kept on increasing.My second printer is a laser, it was not working for a long time, due to which I did not get it repaired because it was costing a lot and I thought why should I spend money now Then I have an option printer 31 16 suddenly the ink in the printer ran out, I did not know that it would run out so soon, so it stopped working I tried putting a Bharti and everything else in it but it didn't work so I took the head off and will repair the head that is not working It will take time to repair, that is why I have got some of his stuff written down, it is about to arrive, then I thought that I should start an interview message.

Then holiday is always special for me, so I always think of Sunday and then I left from here around 2:45 in the afternoon.It takes me about 45 to 40 minutes to reach Meerut and I reached there very easily. After reaching there, I saw that the shop was open.I asked him how much the service would cost, he said he would tell me after seeing it. At first he said it would cost around 150 rupees, then he said it could go up to 500.I said please do it, he saw that one of the bearings in it is not working, my bearing is damaged, so I said please change it Then I bought a new bearing and it was not working so I might need to buy another bearing. He said that one should be for Rs. 350 and the other would cost Rs. 150 per month. Buy both.The expense is ₹500, I said take your ₹500, you can see the rest of the wages later Because I got all the goods for ₹200, so their price might be high, well, something is fine child, but there has been a lot of loss too,With this loss, I got to learn a lot in which I can keep some things in mind before repairing the printer, what is bad and what is right Anything that is defective should be replaced immediately because it may cause problems later.