ENGINE REPAIR WORK - THERMOSTAT GAMMA K-7 Condition By @Sultan-Aceh

---

---

WOX COMMUNITY	Construction of WOX Coffee Shop and PC Repair
Development	WOX Coffee Shop and PC Repair
Location	Cot Kiro - Village Buket
Implemented by	WOX COMMUNITY - Local Aceh-Team

---

---

Hallo All Steem User.

---

Today, during a break from work, I want to show you all, the types of components that I clean, and analyze some of the damaged components that cannot be used.

the material of this machine part, there are some machine materials that must be replaced in repair. however some materials have been replaced, and installed, only some other materials have not been ordered by the car owner. Cooling THERMOSTAT.

---

---

This machine, is a type of Mobil GAMMA K-7 engine, with a cooling system that opens automatically, when the water in the engine is hot, it will open, and when the water is cold it will close automatically, and will be cooled in the radiator channel, until it is flowed back. to the engine, if on the GAMMA K-7 engine, below is the position, the machine tool called the WATER PUMP

---

---

and below, there is a picture of a water pump that is in a damaged condition. and rusty. Water Pum conditions like this, usually, only give normal water to their favorite car engine, however, don't see inside the engine, the condition of the water pump will be as below:

---

---

This machine, is a type of Mobil GAMMA K-7 engine, with a cooling system that opens automatically, when the water in the engine is hot, it will open, and when the water is cold it will close automatically, and will be cooled in the radiator channel, until it is flowed back. to the engine, if on the GAMMA K-7 engine, below is the position, the machine tool called the Water Pump.

---

---

---

---

---

may be useful.

Regards
@sultan-aceh

---

---

---

---

---