Greetings beautiful steemwomen,I hope you all are doing just great,today I will be showing us how to cut an sow a beautiful asymmetric gown, some fashion designers call it monochrome.
First you will need the following materials as well as the measurement.

Materials

1.The fabric
2.linking
3.estay
4.bra cup
5.organza
6.paper gum or interfacing

measurement

Shoulder	15
Shoulder bust point	10
shoulder under bust	13
half length	16
Bust to bust 7
Bust	35
Under bust waist	31
Half length waist	29
Gown hip piont	27
Gown length	38
Hips	39
Sleeve length	22
Round sleeve1	11
Round sleeve 2	7

For the down part
Step1:fold the fabric in to two mark the half length mark the gown point stay on those points and measure the hips and half length with extra two inches,then cut it out and place it on the folded fabric and mark two inches for the zip allowance and then cut it out.
Place the cut material on the lining and cut it out take it to the machine turn it iron and the take the proper measurement.

For the upper part
The upper part is a princess dart,mark the half length with extra two inches,mark the bust point and under bust point the bust to bust is seven add one extra inch and make it eight divide it by two is going to give you four mark all the way down and stop at the half length,mark the shoulder and mark one extra inch,from that on inch drop by 3 and 5, from the half length mark 1and half inch to the under bust link it to the bust point and then to the 5 same with the other mark 1 and half inch to the under bust and then curve the bust point and the cut it out and place it on the linning cut it out and then iron the estay and then pad the bust areas.

For the back of the princess dart
Mark two inches for zip allowance and the measure the half length with exra three inches at the back because of pulling to the front.
Mark the bust point and the shoulder with extra one inch like you drop 5 and 3 In front at the back is 5 and 4 then from the three extra inches mark half inch connect to the bust point and then to the 5 take then take the full measurement with extra two inches and cut out.

You sow the front together turn it with linning and the attach the bra cup join the back too and take full measurement and the cut out then asymmetric by 4 and then sow it and turn it over.

Mark where you want to place the organza and plete it to the fabric and sow.


	organza

For the down part do same, mark the lines you want it to be and then use a long ruler and rule it and plete the organza on the ruled line ,join the upper body to the lower body,cut the sleeve and sow,then put the zip.