On the serpentine belt, it is likely a AC compressor.
Be sure to get a new oil sump pick up and filter if it has one. Don't leave it open any longer than you need to, have all the parts ready with the gasket pre-attached to the pan with #2 Permatex, but leave the top surface clean. Clean what you can reach with B-12 chemtool.
Check all the parts you can, before you remove the pan. Remove the belt tension for a first step. Take pictures before you start, and do a post on it.
:)>
Yeah I figure I'll have to loosen the belt first. If I can get to the tensioner. Clean what I can reach? After I take the pan off? put Permatex 2 on the new pan and put the gasket on it?
where is the oil sump pick up and filter located, is the oil pan covering that?
Does the new oil pan come with bolts?
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Take the belt loose, because the tensioner is spring loaded. Take a picture of the routing of the belt first.
Whatever is exposed when the pan comes off.
Yes, clean the gasket surface on the pan, thin layer of Permatex, and use that to hold the gasket into place.
Both are inside, the sump pickup may have the filter inside it.
No, save the old ones, and re-tighten them in a bolt pattern, jumping across the pan. Unless you can feel them well, use a torque wrench, tighten low level, then final torque them.
Be sure to clean the old gasket off, without scraping the face, and use B12, but NO Permatex!
:)>Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Did you say to replace the sump pickup or just replace the filter? I should be able to google that to find out if that engine has a sump pickup.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Both, but sometimes the filter is built into the sump, and that would be easier.
I always buy a book on EVERY car I have, but I google it too.
:)>Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I'll have to look it up because I don't know what to look for.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Use your model and year and look for transmission fluid change.
:)>Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
What does the engin oil pan have to do with transmissions? What did you say to clean the gasket area with? B12? Is that a common cleaner? sounds like a vitamin.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Sorry same process for the engine, except the sump and filter goes away (on most cars, some engines have sump pickups), the rest is the same.
CAREFULLY scrape off the old gasket first, then clean with B12, it is a basic cleaner at the car parts store.
:)>Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit