Good evening, dear readers. tonight I would like to tell you how you can make a suspended ceiling from a gypsum board with your own hands. The husbands of such ceilings are in the hallway and corridor. Stretching ceilings, we decided against it.
Drywall choose moisture resistant and not lost. After that we were heated several times by neighbors, the ceiling stands.
First, the old PVC tiles were torn from the ceiling. Marked up. Suspension mounted around the ceiling of the future approximately every 50 cm Then the metal profile was fixed to the suspension. In the suspension there are several holes that allow to fix the profiles at different levels. Using level, the metal profile is flattened so that everything is very horizontal in one plane.
The gypsum board is attached to the profile with special self-tapping screws on the gypsum board with a screwdriver. Pre-mark the line where the profile is running so that the screws can be screwed into it. Self tapping step is 300mm.
According to the project we found, we have spotlights on the ceiling. The spotlight fix is marked on the ceiling. The holes for them are made using a crown. We fix the crown in the cartridge and first make some test holes in a small piece of plasterboard. Once they have mastered the technique, the holes are made in the ceiling gypsum ceiling.
After repairing all the connection sheets and the plasterboard screw should be plastered, so there is no difference. In general it is true to glue the lining between the sheets with the ribbon-serpyanka. But we did it without it. Of course, with the serpyank patches, the seams are sealed more reliably, but we all put them gently and the joints flat with rough skin. Everything becomes smooth and not felt.
Then the surface of the ceiling is treated with a deep penetration primer for 2 times. Ceiling ceiling plaster ceiling that has been so.
When it is dry, then they go through the milling machine. At once I would say that there is a lot of dust. We also have doors removed, so there are all rooms in the dust. Therefore, if you make the ceiling in this way, try to cover as many other rooms as possible, doors covered with thick films, as they are washed for a long time.
We did not put the door in the kitchen. To divide the space, made a plywood arch, which then also zashpatlevali and painted together with the ceiling. Now there are many arches ready to sell. They can be installed in place and thus save time to finish the place.
The last touch is painting the ceiling. Painted with a special roller for 2 times. That's what happens, the white ceiling is smooth.
I hope my article is useful to you. Best regards,@badriadi83