I had to turn up my heat setting to 18 gauge now the problem is when I turn that down to weld the slider gauge I wonder if it's going to work right but this I just did this for a rough test of it now so I'm going to try to see what it's like for welding the 22 gauge there so this is a thicker wire and because it's a thicker wire it's going to need more heat like I just sewed on the settings but at the wire speed Metal corner brackets I turn it down so I'm going to see what happens now when I get puts attack on this to see if they settings are going to let me weld together right off the bat I'm just blown holes in it so I gotta turn it down try it again you see the troubles I'm having now trying to get this to weld trying to get the weld here to get it here see it blows through very easy it's a thicker wire it's a lot more heat so I'm going to run into a lot more troubles trying to weld this I turn the heat off to get a better penetration pretty good back there well as you can see now. Large metal corner brackets, Metal corner brackets for wood, Heavy-duty metal corner brackets, Long metal corner brackets, Metal corner brackets Screwfix, Decorative metal corner brackets, Corner brace brackets, L brackets.
Outdoor screws Screwfix, Railway sleeper brackets, Screwfix railway sleeper brackets, Railway sleeper brackets b&q. I got the larger wire in it and what's happening is it's harder to control the heat up in the thinner metals you start blowing through holes another little feature that I know on this here if you notice is that my welds are bigger right and because the welds are bigger there's more grinding involved in it because I got to add more heat to it in order to get this to burn but when I add some more heat to it got intensity you want to burn through so like you got the smaller wire which is the o23 and this is the o3o it's not a big difference in the wire sizes Outdoor Screws but there's a big difference because this here now will you get welded with it it's tricky because it's a larger wire.
So both uh you've got a lot of grinding on it because of the larger wire now this is the o23 war right here I did that we went welded there and this is the o3r okay now you look at that looks like a nice weld okay and then you look at that here and you don't think much of that weld here now I turn this over there's our penetration there we're not getting full penetration out because I'm trying to reduce the heat to uh to get it to weld so it doesn't blow through you could probably play around with it and probably get that a bit better than that but you can just tell by just looking at that and looking at that the difference in the two welds it's a lot harder to do that.