How to microdose LSD volumetric AND legal

IMPORTANT DISCLOSURE: I do NOT promote using illegal drugs or the use of drugs in general. I'm here to share information and discuss the topic. ALSO I'm not a user myself. IF you want to experiment with microdosing, make sure to do your own research too and DON'T even consider if you're under 18!!

Now we got that out of the way, let's talk about microdosing LSD (or 1P-LSD). If you are not familiar with microdosing here is a link that will explain the 6 things you need to know about microdosing:
https://thethirdwave.co/microdosing/lsd/

Why do I want to talk about this?
One of my roommates started talking to me about microdosing and how she wanted to try it for herself. Her reasons were mental health issues and wanting to increase the quality of life in general. I was sceptical and started looking it up on the internet. I read all of these positive stories and it made me change my mind about drugs a little bit. I think using LSD in the way it was meant to be used: in small amounts. There is actually a lot of information about the topic, but there is lack of information about actually getting the things you need and how to do it.

I asked my roommate if I could follow the process with her and share it with others. She agreed, as long as I didn't mention her name. So I'll be referring to her as "her" and "she". Even though she has found a legal way of microdosing, she only wants close friends to know, because of the preconceptions of using drugs.

I will show you the completely legal and safe way she got started with microdosing LSD. That way is called volumetric microdosing. I'll get into that later.

How can it be legal?
If you are familiar with designer drugs, you know they can replicate a drug. There are so many designer drugs that the government can't regulate them all and make laws. Here's everything you need to know about designer drugs:
https://en.wikipedia.org/wiki/Designer_drug
1P-LSD is a designer drug and has the same effect as regular LSD, only 1P-LSD is legal, you can actually purchase it online. This is the place where my roommate bought hers:
https://www.legalsilkroad.nl/artikel/sample-2-lsd-rc-1p-lsd-100-mcg/
It came in an envelope, and she said people can trust this site to deliver and the delivery is very dicrete.

What did she need?
These are all the things she used:

• A 100ug (microgram) blotter of 1P-LSD
• A pipette/syringe of 1ml
• wodka
• destilled water
• aluminium foil
• small bottle

How much did she start with?
“Start low and go slow.” For most people, a microdose is 1/10th of a standard psychedelic dose. That means for LSD, a microdose is typically 10 micrograms.
However, calibration is the name of the game when it comes to microdosing, and many individuals need less than 1/10th of a dose to achieve optimal results.
That’s why starting with 5 micrograms of LSD or is often the best way to begin, as it gives you a lower starting point that you can easily adjust incrementally, if necessary.
My roommate has already tested with 5 microgram, to see if it was safe. She experienced nothing out of the ordinary and then she could up the dose a little bit.

How does she prepare the LSD for microdosing?
When microdosing with LSD on blotter paper, there are two methods to prepare a microdose: cutting or volumetric.
The volumetric method helps you get around any variation in how a tab is laid or cut. It involves submerging a full tab into distilled water and wodka and taking small, measured quantities of the water to microdose.
This process requires a couple of small measurements, but will give you a more accurate, consistent dose.

STEP 1:
Take the 100ug blotter of 1P-LSD and put it in the small bottle. Make sure not to touch the blotter or do it quick to avoid the liquid from coming out and absorbing through the skin of your fingertips.

STEP 2:
Now take your pipette/syringe to measure. Put 5ml destilled water and 5 ml of wodka in the small bottle.

STEP 3:
Shake the bottle and put it in the fridge. Use aluminium foil to protect the mixture from light, wrap it around the bottle and write down the date. This mixture will stay good for a few months.

STEP 4:
Leave it in the fridge for 2 days and shake the jar occasionally.

STEP 5:
Your mixture is done! The mixture is 10ml with 100ug 1P-LSD.
Now, you just need to take 1ml with your pipette/syringe for a 10ug dose. If you microdose with less than 10ug, simply scale it to your volume – 0.6ml is 6ug, 0.8ml is 8ug, and so on.

This volumetric method of microdosing provided my roommate with a consistent microdose.

That was my tutorial, if you'd like to know more about microdosing, I could make a follow-up post with these topics:

• How to know if the LSD is real and of high-quality?
• Beginning a regimen
• Benefits
• Mental illness

Some links to help you get started with crypto currency (and you support me!):
Cryptotab: https://get.cryptobrowser.site/491184
Titan Trade Club: https://titantradeclub.com/register/Wies
Eobot: https://www.eobot.com/new.aspx?referid=1938949
Freebitcoin: https://titantradeclub.com/register/Wies
Moon litecoin: http://moonliteco.in/?ref=168e16b2f798
Moon dash: http://moondash.co.in/?ref=84437FFE4E8B
Moon bitcoin: http://bitfun.co/?ref=0A4FCC8A6BF7
Moon cash: http://moonbitcoin.cash/?ref=3DDA830299FC
Moon dogecoin: http://moondoge.co.in/?ref=f50c2be30005
Bit Fun: http://bitfun.co/?ref=0A4FCC8A6BF7

Thank you for reading, questions are always welcome!

X
Wies