Multi turn angle valve N10121007 is designed and produced with ceramic cartridge for sanitary uses, multi turn enables the user to adjust flow rate slowly and accurately.
https://www.brassvalveschina.com/
Parameters:
• Sizes: 3/8" to 1/2" (DN10 to DN15)
• Working pressure: PN16 / 200WOG
• Working temperature: -10 to 110℃
• Polished and chrome-plated valve body
• BSP or NPT Threads available
• Customized production acceptable
• Materials: CW617N, HPb57-3, C37700, DZR
Features:
• Ceramic cartridge
• Multi turn open/close
• 100% leakage test for each valve
• Suitable for a full range of liquids
Parts Material
Body Brass
Ball N/A
Stem Ceramatic
Seats Rubber
Gaskets Steel
Handle Brass
Compression Nut Brass
What is multi turn angle valve
what is multi turn angle
Multi turn angle valve is a necessary plumbing fitting in toilets, kitchens and other places. Multi turn angle valve composes of brass valve body, ceramic cartridge, handle.
Where multi turn angle valve are used
where multi turn angle are usedMulti turn angle valves have a wide application range, indispensable to kitchen and bathroom water supply, connect the pipelines to faucets by flexible hose.It is a necessary fitting for connecting faucets, water heaters, toilets and other sanitary equipment. Multi turn angle valve is generally used at the location of the plumbing outlet. When the faucet leaks, as long as the corresponding multi turn angle valve is closed, the faucet can be repaired or replaced without turning off the main valve to affect other places. It is the second guarantee switch for sanitary equipment.
Multi turn angle valve repair
multi turn angle valve repair
You need to repair the multi turn angle valve when it found leaking or breaken, here are DIY steps for multi turn angle valve repair:
Close the main valve of the pipeline or house water supply, ensure no water comes out during multi turn angle valve repair.
Clean the pipe end to remove dust or burs.
Choose an cmulti turn angle valve with the same specifications as pipe thead size. If the pipe thread size is female 1/2", then the selected multi turn angle valve must also be male 1/2".
Install the decorative plate the multi turn angle valve.
Use the PTFE thread tape to wrap the screw port of the multi turn angle valve. The winding direction of the raw material tape should be opposite to the thread direction of the multi turn angle valve. If the thread direction is installed in a clockwise direction, the raw tape should be wound in a counterclockwise direction.
The thread of the multi turn angle valve is installed in a clockwise direction, so the PTFE thread tape is wound in a counterclockwise direction, and it can be cut by winding about 5-10 times.
Switch on the main valve of the pipeline and turn on the switch to test whether the multi turn angle valve is leaking. If there is water leaking at the interface, you can remove it, wrap the raw material tape and repeat the above operation.
Multi turn angle valve repair is finished till this step.
How multi turn angle produced
how multi turn angle producedThe production of multi turn angle valve starts from raw brass material, and have 8 steps： Raw material (brass) → cuting brass bars → forging → machining → surface treatment → electroplating → assembly.
sourcing page: https://www.brassvalveschina.com/multi-turn-angle-valve/