Hello dear readers; New week, new model !!! I thank the Universe for this new day of work to bring you an innovative and colorful model. This model is simple, easy to manufacture and can be used in day-to-day oufit. The manufacturing process is simple, I will explain it little by little according to the sequence of images, all the photos taken with the computer camera.
The collage is made with an excellent page called Befunky, I recommend it is easy and practical to use. I wish you like it, as you already know it more than my work, it is my passion, I love what I do, I share it with you with a lot of love ...
If you have a question, do not hesitate to write me, I will be happy to help you.
Materials:
Needle
Sewing thread
Mostacillas or canutillo split
Soutache yarn or rayon braid
Lighter
different pieces of nacre
Fabric or Coarse Leather
Flat tendril base
Strass 3 mm
Apply round 2 cm in diameter
Scissors
Liquid silicone
Encourage basic use when the task is important.
Eyebrow tweezers
Love, encouragement and patience ... Step by step we will learn!
Let's work: 🤗
STEP 1: Cut a piece of leather or thick fabric of 9 cm high by 10 cm wide, it is better than about and not lacking approximately 3 cm from the top we will place a little liquid silicon and so we go to stick a drop of mother-of-pearl of approximately 2 cm, if you do not have nacre you can use a drop-shaped applique, cut 3 threads of approximately 12 cm each, then around the mother-of-pearl we will place liquid silicon and with the help of the clamp we will stick the threads little by little to be glued completely spread liquid silicon on the sides.
STEP 2: Place liquid silicone on one side as shown in the first image and with the help of the clamp we will place a nacre stone that is smaller, approximately 0.8 mm, the thread that we have left to bend it to cover the mother-of-pearl, mark the thread that we have left over, cut, burn, put a little liquid silicon on the tip and with the help of the clip we introduce the tips on the bottom of the stone for a better finish.
STEP 3: Repeat the previous step of the opposite side little by little, at the end we must place liquid silicon all along the shore and with the help of the clamp we will stick mostacilla or canutillo broken step by step taking care not to dirty the top part with the glue , as you will see in the last image.
STEP 4: When finished gluing the split comb, cut 3 threads of approximately 13 cm long each, glue them under the split comb with a little liquid silicon on each end we must bend the remaining thread towards the inside, mark the remaining thread, cut, burn, introduce the tips from below, when we finish we put liquid silicone on the bottom of the strings already glued and paste the 3 mm strass well attached covering from end to end as in the last image.
STEP 5: I do not usually sew on the tendrils, but I think this is perfect. We will use needle for mostacilla is thinner than normal, cut 3 threads of approximately 12 cm long each, leave about 3 cm free, introduce the needle between the strands previously arranged one above the other, we begin to add beads or split canutillo according to our choice as many as you want will depend on how long you like it, when you finish inserting the canutillos you should return them by leaving a mostacilla on the outside as in the image number 7, sew the strips every 5 mm, you can place the stone that you want according to your taste and availability.
STEP 6: To finish we sew inside several times to close, cut the remaining thread. Below the strass previously glued we will place liquid silicon and we proceed to stick the threads that we cook, the remaining thread, we mark, we cut, the ends are burned and with the help of the pinza we introduce them below for a better finish, it should be as I show you in the sequence of images.
STEP 7: We are about to finish, 1 cm away from the tendril in the upper part, insert the base of flat tendril placing liquid silicone below and above it, stick a 1.3 cm nacre stone, spread liquid silicone around it , cut 3 threads of about 6 cm each, insert the ends under the tendril, stick them around the stone, cut the excess thread, burn the tips and insert it under the tendril as I show in the sequence of images, cut the remaining leather step by step pass the flame of the lighter all over the tendril to seal the threads, so we finished our tendril repeats the steps to make the pair
If you have a question write me a comment, I will be happy to help you with any detail, I hope that my designs like them as much as I like, learn with pleasure ... Thank you for your support and your incentives and donations with that I can buy more material and follow every day with the tutorials!
Never forget that Power is Wanting and if you want You can ...
You are Light you are Energy, YOU CAN ... That the infinite universe Conspire so that everything always is better ... They are wanted ...
Very cool ,, handicrafts that are very interesting and fun to learn.,
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
This post was shared in the Curation Collective Discord community for curators, and upvoted and resteemed by the @c-squared community account after manual review.
@c-squared runs a community witness. Please consider using one of your witness votes on us here
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
So gorgeous! And such attention to detail in the instructions as well. Great job!!
Posted using Partiko iOS
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Thank you, for reading me I like your words
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Hello!
This post has been manually curated, resteemed
and gifted with some virtually delicious cake
from the @helpiecake curation team!
Much love to you from all of us at @helpie!
Keep up the great work!
Manually curated by @vibesforlife.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Thank you, it makes me feel very happy your great support is incredible 🤗
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
the process seems so simple. I don't know if I can make it. hahahaha
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Thank you for reading me, everything is possible, you just have to try the sky is your limit, do not say no if you have not tried
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
These are very pretty! Thank you for sharing the step by step process with us ~
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I'm glad you like it, use a different needle and I love the result I hope you do :)
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Yes I do! 😉
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
These are a little bit more playful in designs and colours, @marleyn ! I like them :) They exudes "fun" quite strongly !
Very nice step by step presentation, also :) Lovely handiwork <3
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Thank you, for reading me if I use more cheerful colors;) it makes me happy that you like them
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Hi, @marleyn!
You just got a 0.11% upvote from SteemPlus!
To get higher upvotes, earn more SteemPlus Points (SPP). On your Steemit wallet, check your SPP balance and click on "How to earn SPP?" to find out all the ways to earn.
If you're not using SteemPlus yet, please check our last posts in here to see the many ways in which SteemPlus can improve your Steem experience on Steemit and Busy.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Congratulations @marleyn! Your post has been placed in the spotlight for this weeks @NeedleWorkMonday Featured Post #47!
Thank you for your quality post and for being apart of the needlework community!
#NeedleWorkMonday is an initiative that supports and rewards the needlework community while inspiring the Steemit blockchain.
For more information on #NeedleWorkMonday and the @needleworkmonday community please visit our FAQs!
Our Motto: Support & Inspire
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
This is really wonderful
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Oh wow!!! I love your design! It looks really really beautiful!
I love how tidy and neat your finish is, it often makes a huge difference to how a piece looks. Your pair looks perfect :)))
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Thanks for reading and taking the time to write me makes me happy that you like my designs I do it with love and super happy to share it here ☺️
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Congratulations @marleyn! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :
You can view your badges on your Steem Board and compare to others on the Steem Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP
Vote for @Steemitboard as a witness to get one more award and increased upvotes!
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
You got a 0.61% upvote from @ocdb courtesy of @marleyn! :)
@ocdb is a non-profit bidbot for whitelisted Steemians, current max bid is 25 SBD and the equivalent amount in STEEM.
Check our website https://thegoodwhales.io/ for the whitelist, queue and delegation info. Join our Discord channel for more information.
If you like what @ocd does, consider voting for ocd-witness through SteemConnect or on the Steemit Witnesses page. :)
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit