"It consisted of a chair in which a person would sit. Coils, which served as sensors, were placed around the chair."
"Three sets of coils were set up in a pyramid around the chair. There was also a coil around the top of the pyramid to parallel the base coil. The person would be placed inside the field of the coils. The three sets of coils were connected to three different radio receivers (Hammerland Super Pro P600’s) and six outputs."
"With the use of an oscillator, the detectors in the receivers were able to lock on a phantom or etheric signal that was being picked up by the coils."
"It had a different kind of coil set-up wherein the coils were connected to crystal type receivers. These were actual crystals and not ordinary electronic devices."
"These Tesla receivers had very special coil structures. They were normal type radio coils but were arranged in strange coupling patterns as set up and designed by Tesla."
"The set up of the Montauk Chair was also enhanced by using Helmholtz coils. These were placed around the chair to serve as pick up coils. In ordinary electronics, Helmholtz coils consist of two sets of coils. They possess a unique property in that they can be phased to create a constant field (of energy) inside the coils. At Montauk, the researchers extrapolated upon the principles of Helmholtz coils. They used three sets of coils (X, Y and Z), and phased them so that while a constant energy couls be maintained inside the coils, there was absolutely no effect on the outside.
The coil structure in the receivers designed by Tesla was ideal for the Montauk Project. Not only would the chair be in a coil structure, but so would the receivers themselves. This would shield the energy field.
It should also be noted that the coil structures in the Tesla receivers are also known as Delta T or Delta Time coil structures."
"To get the Montauk chair operating without interference, they had to replicate what the crystal receivers did with the “Sirian” technology. The coil structures in the prototype receivers were Delta Time coil structures. And the receiver itself did the Delta Time function, but not the antenna. ITT had the Delta Time function in the antenna instead of the receivers. The RCA version used standard type Helmholtz pick up coils that could accomplish Delta Time conversion in the receivers. They also had the same kind of detector system and oscillator locks that ITT used with the Cray 1 computer."
"Changes had to be made, such as setting up pulses into a coil. We also studied pyramid based geometry and how to use that to bend the time field. Additionally, we had to learn more about what is known as the Delta Time function (time changing function)."
"The Delta T transmitting antenna was supplied by three drives. Two of the drives came from the pulse modulators of the two transmitters and fed into the x and y coils of the Delta T."
"The coils were placed around the deck and were driven by pulses."
"The pulse modulators of the transmitters were feeding both that antenna and the coils of the Delta T antenna (underground)."
http://www.zamandayolculuk.com/html-3/mountauk_chair.htm
"The HDR caduceus coil built by Steven Gibbs should have the ability to generate an electromagnetic field that disrupts time waves and alters the flow of chronoton particles."
http://www.rexresearch.com/gibbstime/gibbs.htm