RE: Antminer D3 & L3+ Nicehash Setup Guide

You are viewing a single comment's thread from:

Antminer D3 & L3+ Nicehash Setup Guide

in nicehash •  7 years ago  (edited)

Heads up! If there is a space after #xnsub then xnsub won't work! Make sure there are no extra spaces at the end of the pool URL!

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
Sort Order:  

Thank you for the heads up.

whats is #xnsub as i dont useit but mine still works?

xnsub = extranonce subscription. The very very short discription is this feature provides a more stable connection to the Nicehash stratum servers.

P.S. Keep an eye on the ASIC setup page on the Nicehash website as they provide updates if your Antminer requires a firmware or patch update. https://www.nicehash.com/asic-mining (via this link scroll down to ASIC tips & Tricks)

I have over clocked my L3+ to 605 mh/s and can you over clock the S9's ?

To confirm you can overclock the S9. As an FYI any Antminer device that is overclocked instantly voids the warranty

Just a heads up... If you don't keep that cool... You'll brick that L3+

Don't push much past the 400-410 Freq range...

I may or may not have done that by accident with an L3+ ... Don't ask - it was stupid.

On my L3+ I'm running at 444 (580Mh\s) and the fan is set at 60%. My Antminers are in a server room and temps range from 47 to 53 degrees celsius. I didnt overclock my D3 miners as they are running at 17500Mh\s with default settings but I did set the fan at 70%.

Thank you, BTC sent.

Greatly appreciated :)