Classification of satin ification Satin or satin are generally of two types, viz., (A) regular satin or satin. (B) Irregular satin or satin. In addition to the above two types of satin and satin combinations (1), satin-satin stripe, and (2) satin-satin check The design is made. Regular satin or sateen - A single move of repeat size for all satin weaves. There are numbers, they are called the regular satin weaves. The regular satin weave is not possible under 5 x 5 cells and Very large regular satin designs are also not made. Irregular satin or satin (Irregular satin or sateen) - all satin weaves do not have a specific move number, They are called irregular satin weaves. Irregular satin's smallest design is 4 X 4. Satin-sateen stripes Satin and satin combined designs create different design effects Can be done. Usually, 1 warp satin and 1 waft satin of a certain repetition are arranged side by side like two drawn yarns The fabric stretches from one end to the other to form a satin-satin stripe.
Satin-satin at the end of this chapter The stripe design is on display. Satin-satin checks ঃ Satin and satin combined checks according to satin and satin stripes Creates effects. 1 World Satin and 1 Weft Satin of specific repeat as well as one according to plain design Up One Down This rule arranges 1 satin and 1 satin alternately to create a check effect on the entire fabric. At the end of the chapter, some designs of the satin-satin check effect are shown. Rules for forming regular satin or satin weave: In the case of satin weave, the distance between the brackets is correct and In order to keep it equal, some rules have to be followed. Weave number, move number or count number, etc. designs are ready Need to know before doing, so the design is easy to draw. Moreover select the step value or move number Totally depends on the weave number. The smaller the wavenumber, the lower the number of move numbers. 1.4 Determination of the move number of regular satin-satin regular satin-sateen): In order to determine the step value/move number/count number, some conditions have to be complied with which are as follows: The weave number of regular satin-satin should be comparatively six. 2. Step value or move number will never be the same. 3. The move number will never be less than the weave number since the design is made according to Twill. 4. Weave numbers and move numbers cannot have any common values or common factors. 5. The number of repeated and drawn threads has to be divided into 2 unequal parts so that they The result is equal to the number of repetitions. . Move numbers can be applied to World or Weft. Each drawn and read yarn of the repeat creates brackets only once.