Assalam-o-Alaikum!!!

Greetings to my all Steemit family. Hopefully, you all are great and enjoying your good life on STEEMIT. I am also fine ALHAMDULILLAH. And today I am going to share my engagement contest Post. I will try to fulfill all tasks.

_{Poster my Wall}

Describe the process of tracing both parts of the basic pants pattern. And place your final result.

So, we painted a sketch with you guys. I will share the front and back side in but I have to share the sketch of the front side with you guys first, and so I have to share it first. In the step, I made a rectangular box whose width was 3.5 inches and then I made another box below it whose width I have taken 2.7 inches. And I've made a box below that, and then I've made the bottom detail box a little bigger because the bottom was the length. I have taken these measurements.

Just like that, we have four edges, and I've named the edges ABCD. Now I've named the first box 1. and the other one is called 2 in the same way I have made a point in the middle of B which I have given the number 5. We have taken the measurement that That's Waste's margin, and just like that, I've made a curve while we've been on lines five through B, and that's the line that goes to my seven-point, which I've done on the line and a point 8 on the D line.

Here is the seam, and it reaches the line, just like that, I have made a curve to three points, which is the middle, and here I have three points, and after that, the same line is going on. I have a line of C and D but an eight number I took the point that would go down the length from there and I told him I had made my mate.

Back side:

Now let's move on to the backside. The back side is a little more different than the front side, but this is the first sketch. and after that, I made two more and it is just like the front side, I have done three rectangles in the way of the front side. After I did the next step I got a four-point on top of A and I got a 5-point with the B. This is the measurement waste of this thing.

And just like that, from four to nine points. which I've built at home. On the other hand, take it up to the point. And just like that, I've just started to do it from point five, which is the line of C. Already, but the next point I've taken is matched with it, and now we're going to cut. Along with the cutting, you will get to know the shape

So now I have completed the cutting of both the front side and the back side, as you can see it is exactly the shape of the pant and now we will sew it according to our measurements. This is the cutting that I painted on my front side, what about the back side, I hope you all like my work

Cutting of Front & Back Side:

here is the cutting of Front and Back side. And I hope you will like and appreciate. And I try my good to full fill this engagement task. I hope that you will like and apprec itiate it more and more