The slots therein so the black border frame type goes around, your LCD phone parts assembly comes off leaving you with the top pass or plastic piece and the mid-frame here's the battery so FB 55 into 3716 Milan battery. The port number four is SN n five nine five eight a so you have this cable over here this one leads from underneath the battery to where your power button and your volume keys are and also attach it to this small board over here.
Where your front-facing camera is and you can separate this cable tightly to the front touch and this one will be for your main LCD and from the looks of it, looks like you would be able to pry this top glass off to replace it but since. this is supposed to be unbreakable I don't see why anyone wouldn't need to be replacing this class or if it's plastic I'm not sure.
so, we're going to go ahead and put the phone back together so first thing, you're going to want to do is reinsert the LCD flex cable in this connector most that's in next, you're going to want to do is reattach that this black cable right here at least to a small border if you just reattach. it there and put back in the socket and then on your mainboard lock your LCD flex cable in place by pushing down.
The black tab pop this counter back in and then you can reinsert this infrared sensor back in the socket Ipreo digitizer phone parts go back down fit it in. This connector let's back in focus tap that down so locks it in place okay pop your battery connector back on and once you do so put.
Your protective plastic stickers back on the yellow colored ones the one which goes over your LCD connector and you have one for the digitizer connector like so, you have both your stickers back on now you could reinstall this bracket or cover and you can put the black tape back over go ahead and pop on the frame that goes around the LCD or the border.