I hope you are all well. Today I am going to share with you a simple embroidery design that I have recently tried. With the Steemit learning club starting this week, I thought of making a craft for it. I am making this design in relation to the #textileclub.

I have done many different macrame designs with woolen threads before. But I have not done embroidery designs. But even though I had bought all the necessary materials for embroidery about two years ago, I did not have time to do embroidery. But I started embroidery with a simple embroidery design the yesterday and I am happy that I was able to do the design I tried first beautifully. You can see the steps and that embroidery design below images.

Materials :-

• A piece of white fabric
• A frame to hold the fabric
• Scissor
• A large needle
• Wool thread ( pink and green colour )
• A pencil
• And a ruler.

---

Step 01 :-

First, take the piece of fabric and draw lines on it, spacing them as desired.

---

Step 02 :-

Then, firmly attach the piece of fabric to the frame. The fabric should be attached so that it does not pull.

Step 03 :-

Then, to stitch the embroidery design, thread a piece of pink wool thread into the needle and start stitching as shown in the images below.

Step 04 :-

The shape that is going to be created is similar to the feather stitch shape. However, this is not a feather stitch pattern.

The symmetrical lines on both sides should be sewn at equal distances. The length of each shape is 1.5 cm.

Step 05 :-

The above shape should be sewn until the line is finished. After one row is finished, the next row should be started.

Step 06 :-

Sew all 6 rows as above.