"Future Mars transfer vehicles will need around 400kW-2 megawatts of power to successfully ferry our astronauts or cargo to and from the Red Planet. We’re still exploring vehicle and propulsion concepts for Mars, including a combination of nuclear electric and chemical propulsion and other emerging options like Nuclear Thermal Propulsion."
https://www.nasa.gov/feature/glenn/2020/the-propulsion-we-re-supplying-it-s-electrifying
"NASA Evolutionary Xenon Thruster
NASA Glenn researchers prepare for an ion engine wear test of the NASA Evolutionary Xenon Thruster (NEXT). This advanced system will use electrically charged xenon gas atoms (ions) and electrical power to drive future spacecraft. NEXT is a new alternative to chemical propulsion and could revolutionize the way we send science missions deeper into the solar system."
https://www.nasa.gov/centers/glenn/multimedia/imagegallery/image_feature_003_C2003-583.html
"MPD thrusters using noncondensable hydrogen propellant will eliminate these concerns and provide higher exhaust velocities than lithium-fueled thrusters."
"Testing for these thrusters has demonstrated exhaust velocities of 100,000 meters per second (over 200,000 mph) and thrust levels of 100 Newtons (22.5 pounds) at power levels of 1 megawatt. For perspective, this exhaust velocity will allow a spacecraft to travel roughly 11 times the top speed of the space shuttle (18,000 mph)."
https://www.nasa.gov/centers/glenn/about/fs22grc.html
"The MFD generates a magnetic vortex field, which disrupts or neutralizes the effects of gravity on mass within proximity, by 89 percent. Do not misunderstand. This is not antigravity. Anti-gravity provides a repulsive force that can be used for propulsion. The MFD creates a disruption of the Earth’s gravitational field upon the mass within the circular accelerator."
"The 3 multimode rocket engines mounted under each corner of the craft use hydrogen or methane and oxygen as a propellant."
https://theeventchronicle.com/secret-plane-tr-3b-patent/#
"Hydrogen and Oxygen gas spilt from water, we can "Hydroxy gas"
the molecules are bonded together positively in a ortho hydrogen state,
2.4x's to 4x's more powerful than the normal "para hydrogen" The common hydrogen "para hydrogen" the apposing negative state of hydrogen that can be pressurized into a metal tank or bottle. NOw they store it in plastic bottles., that can take high pressure for long periods that we see in pressured into a liquid metal bottle of gas. Hydroxy gas can NOT be stored this way, it is too powerful to store in a tank."
http://waterpoweredcar.com/
"helium-3 is a completely clean source of energy. Two helium-3 atoms are fused in a thermonuclear reactor to produce normal helium and energy. The fuel is non-radioactive, the process produces no radioactivity, and the residue produces no radioactivity. It is the perfect energy source. However the helium-3 reaction takes place at 10 times the temperature of the TOKAMAK. It will probably take 10 to 20 years to work out the physics of containing the reaction."
https://www.nuenergy.org/helium-3-fusion-energy/
"The antenna is basically a polished metal plate"
https://www.investmentwatchblog.com/how-to-use-a-100-year-old-device-to-generate-free-electricity/
"energy-harvesting antenna"
https://scitechdaily.com/harvesting-energy-from-the-air-metasurface-based-antenna-turns-ambient-radio-waves-into-electric-power/
How to Build a 1.35 Million-Volt Tesla Coil
"Perhaps the most important component of a Tesla Coil is its power supply, and also probably the hardest to obtain."
https://dereklow.co/1-million-volt-tesla-coil/
"A Tesla coil is a device for making very high voltages. Voltage is a way to measure how much energy an electric charge has. Tesla coil can make voltages of more than a million volts."
https://wonders.physics.wisc.edu/tesla-coil/
"When you charge up a rigid flat plate capacitor to sufficiently high voltage (apparently as little as 5,000 volts in some situations), the whole assembly will develop thrust towards the positive plate (and move in that direction if un-impeded). Brown found that the higher the voltage, the higher the thrust. And the higher the dielectric value of the insulator between the plates, the higher the thrust. And apparently, the thrust developed does not particularly "use up" the high voltage used to initiate the effect."
http://antigravity101.com/
"an equilateral triangle, 8 inches per side, composed of thin sticks of balsa wood. There's a ring of copper wire from RadioShack strung around the top and a strip of Reynolds Wrap held down with Krazy Glue around the bottom.
When I throw the switch, 20,000 volts will course through this bundle of sticks and foil – and it will levitate."
https://www.wired.com/2003/08/pwr-antigravity/
"the fastest-ramping high-energy particle accelerators still use magnets with copper conductors operating at room temperature"
"Most of the powerful superconducting magnets employed in modern-day particle accelerators are relatively slow when it comes to increasing the magnetic field. Their main goal is to ramp up to a high peak magnetic field to steer particles around a ring while electric fields propel the particles to higher and higher energy. The higher the energy, the stronger the magnetic field must be to keep the particles in their track as they go around the ring."
https://news.fnal.gov/2021/11/particle-accelerator-magnet-sets-record-using-high-temperature-superconductor/