View this post on Hive: Steemgigs: Need some plumbing help
Steem is no longer decentralised and may steal your funds. Use Hive instead.
View this post on Hive: Steemgigs: Need some plumbing help
Steem is no longer decentralised and may steal your funds. Use Hive instead.
If you can replace that washer, that should fix the problem. After a while, those rubber gaskets get hard and will no longer seal and then you tighten it down and it breaks the rubber seal down. If it is not a replaceable washer go get some gasket material and use just a little gasket maker on both sides, one side to help hold the gasket material in place, of the material and it should seal up just fine.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
The hose is new, but maybe this washer is just really hard. I'll see if I can find another
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Sometimes the rubber washers get hard as they may sit for a while dry. When you go get just the replacement washer see if you can check and make sure it is pliable. If it says to only tighten hand tight and you use channel locks to tighten it, the washer is toast really at that point.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
This was a new hose and washer. I'm getting a different hose tomorrow. Just want to get it fixed now.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I hope I have helped and you get the problem fixed. Take care! Steem On!
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Well I may be "THE @mobile-joat" but to properly access the situation from a few pictures can be difficult... Here's a suggestion that may do the trick... Sometimes fittings are not molded or formed close enough to have a tight fit. So to compensate for these issues I'll sometimes use (2) washer/gaskets in the end of the line. However, either way you're going to have to use a pair of channel locks or pliers to get it tight. Also consider when you are finished working on it you may have water leaking around the pump inside the machine I've seen it happen many times thinking it was a line and ended up being a bit more of a problem than expected. Hope this helps.
The @mobile-joat
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Yo! Sorry for off-topic but I saw your post from few months ago were you say that steemit needs more meaningfull curators + that you have delegated some to some small deals.
As you can propably bet from my name, I am a gamer. I came here december and have gotten pretty pissed-off to lack of community. What I figured out yesterday is that I start upvoting only comments from gaming section of D.tube. With this I hope to eventually grow curators with meaningfull upvotes, which in turn helps building a real community.
Even very small delegation could help a bit, if you will. Thanks in advance.
Ps. I test delegated 1000 sp to one guy, who then went to upvote gaming content because of motivation. Just said so it doesn't look too shady.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
You'll see that I've delegated a lot already. I want to hang onto some SP to use myself. Maybe you need to hook up with other gamers, e.g. @jumowa. There are communities forming here. We have a nice one of runners. I wish you all the best
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Thanx for response! I don't personally see too many communities forming as most of them seem to be just some "use tag, may get upvote resteem". I would rather see those as some groups, rather than communities as they seem to be very isolated from one another and there is no bleed out to other content from them. I see the problem being that most of these groups are to support creators only, and people are giving up their curation because they feel demotivated to do it them selfs.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Adding some vaseline around the seals?
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I'm wondering about something like that. There may be some products designed for the job. Not sure I trust regular vaseline to last.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
You can buy gasket maker that will harden to different levels of hardness that might work.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
It doesn't look like a jubilee clip would have anywhere to sit on that either. Old skool retro/steempunk... go Jubilee!
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Wipe it down before putting it back together in case theres any particulate hanging the seal up.
I'd put some ky on the washer Vaseline may work but may dry rot the seal.
The thread tape idea may help, but is really only a stop gap you want that grommet to seal that's where the ky comes in if you over torque it it may bind the gasket up and pinch it.
Also as you're tightening it jostle it a bit not so much as you're risking breaking it but enough to take up any slack in the threads and keep them spinning as you tighten it.
I hope this helps if you need any clarification or whatnot or possibly other ideas msg me back.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I may just buy another hose. I think the washer on this one is too hard. They are not expensive
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
something about how that flange is put togeher doesn't seem like it jives well with the other half of the connection.
Almost looks like your hose might be a Euro type fitting and the washer might be North American or something which is basically the same as a garden hose over here.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I'm going to buy another hose anyway. They are cheap. The washer on this one is rock hard. It's just annoying when things don't work as they should
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I hope some of this helped, sorry I'm not on discord as of yet or I may have been able to communicate a little better in words.
If another hose doesn't fix it I can assure you there's something other than the hose going on.
It'd be a shame to go through two or three hoses only to find out it's something else entirely.
I'm not sure if sears parts ships to UK but if they do they're an awesome resource for parts for almost anything.
Have a good day and thanks for the wire.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Well the best part of what I had to offer was lubing so that you don't kink the washer, and giving it a jostle to make sure it's got all the play out.
But the hose you show in the picture doesn't look like the two types of fittings are the same almost like it's leaking between the gasket and the inner flange of the fitting.
Other than that all I can tell you is good luck.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Is it leaking past the seal or is it leaking out of the threads? Try some Teflon tape around the threads to eliminate that possibility.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Advice I've seen says tape is not a good idea. The washer should be enough
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
although the possibility I am late to answer but this answer from me: plumbing issue you can be overcome with seal tape, we indonesian people often do it and leaks can be in control
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
A few people have suggested this and I mentioned it. This is not the answer to every problem and can apparently make some worse. The washer should make the seal. I bought a different hose and this seems to be okay.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Hahaha amazing. https://steemgigs.org is forming up and it will even have DIY.
This interesting. The code is open source both front and backend so we will move fast.
Thank you for remembering the tag
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
In place of teflon tape, I have used a cake of soap.
Take a bar of soap. rub it (dry) thoroughly around the threads (after cleaning them, as suggested earlier)
Also, inspect closely for debris or misshapen plastic. Bright lights and patience can pay here.
Good luck!
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I guess some lubrication may help. I'm getting another hose to try next
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
The soap isn't for lubrication, as I understand it, it functions the same as teflon tape (helping with the seal)
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Very elegant way to present you, The truth is in all your words.
It is possible to get many useful examples from your writing. well done and keep it up.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
A lazy panda indeed
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
i agree with @basicstoliving and also use Teflon tape around the thread
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Hahaha. My washing machine stopped working 2 weeks ago. And I don't go to that bathroom to see the broken washing machine instead I go to the other one.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Not funny when your house gets flooded
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit