A: What is the PIXE analytical technique?

in stemq •  6 years ago  (edited)

Protons.png

Dear fellow steemians and friends. Today I again bring to you a bit of a different topic but as you will see it is still related to my fusion work I usually talk about. I will be talking about an analytical technique called Particle Induced X-ray Emissions or PIXE.

What is it?

PIXE is first and foremost an analytical technique that gives you a qualitative 2D distribution of concentrations of elements in an investigated material.

At its core it is a simple technique. An accelerated particle is shot into a material. There, several things can happen but the most probable process is that a particle knocks out an electron from the so-called K-shell. This is a spectroscopic designation for the inner-most electron orbital. The electron is knocked into the continuum where it is lost to the atom but a so-called hole persists where the electron was. Such an atom is not stable and will soner or later relax with various mechanisms. In all of the mechanisms an electron from a higher orbital falls into the hole and the excessive energy must be released somehow. Either it is absorbed by a electron which is trapped in the outermost shell, which then also leaves the atom. This electron relaxation is called the Auger effect.

The mechanism that is relevant to us is where again an electron falls into the generated hole and a characteristic photon is radiated. Because this photon is in the X-ray part of the EM spectrum this is called X-ray emissions.

We can collect the photons with a solid state x-ray detector which is able to count the amount of photos detected at specific energies. We can also count the number of particles that hit the material of question. We have a lot of information already but still not enough to say quantitative statements about elemental concentrations in the material. In principle we can differentiate different elements because the X-rays emitted during relaxation have characterstic energies depending on the atom they were radiated out.

If we use protons as our particles of choice we also get the quantitative information. This is because the probabilities for protons to dislodge electrons from various electron orbitals are very well known. If we know how many protons were shot into the sample Np, the number photons of a typical wave-length detected Nphot, the probability of a proton kicking an electron out η we can calculate the concentration of a specific element c by using:

c = Nphot/Npη

The protons usually originate from an accelerator as the probabilities depend strongly on energy. The probabilities for K-shell electron - proton interaction are significant only in MeV proton energy range. Also the protons can be focused into sub-micron ranges so the technique also has microscope imaging capability.

Comparison to other similar techniques

Now when we know how the techique works we can compare it to other techniques that work is similar fashion. The most used is the so-called Energy-dispersive X-ray spectroscopy - EDS. Here a X-ray source is directed onto a sample where they excite the atoms. These atoms relax with radiative X-ray photon emision similar to the PIXE technique. Similarly the X-ray source can be focused into sub-micron beams making the technique be usefull in a microscope fashion.

So what is the difference?

ComparisonEDS-PIXE.jpg
source

Well as you can see the main difference is the sensitivity of both techniques. Because EDS has a much stronger X-ray background it is not suitable as a trace-element probing technique. Meanwhile PIXE has a sensitivity in the part per million - ppm. But... And it is a big but. EDS is a table-top machine and therefore quite accesible and cheap. PIXE needs particles accelerated to MeV energies meaning an accelerator is needed. This makes the technique much more expensive. But it is completely unreplacable when it comes to trace-element analysis.

An example

The PIXE technique is an important sample analysis tool in our own lab. It is mostly used in the biology field as biologists are very interested in how various elements are distributed sample-wide in various grains or other plant-samples.

Bellow I shortly describe an experiment on barley. You can read more about it here.

Distribution-maps-of-zinc-Zn-iron-Fe-and-manganese-Mn-obtained-by-quantitative.png

In this specific example biologists were interested in how trace-elements that are vital to our nutrition is distributed in various genotypes of barley grains. This is important because elements like some metals (Zn, Fe, Mn, ...) are vital for our nutrition, but usually our intake of them is simply not enough for maintaining our health. This means that even in the West where food-scarcity is low, some people suffer from various mineral deficiencies.

To make a long story short... By determining which barley genotypes absorb the most valuable nutrition elements from the soil into the grain the biologists can then suggest which barley grains should be planted and processed in specific ways to still retain as much nutritional value even in their flour form from which bread is then baked.

A similar project was undertaken but investigating beans. A genotype was determined which retains the most nutritional value and still does very well in the tropical African weather and in the poor African soil. This bean genotype was then planted to help eliminate hunger in sub-Saharan Africa.

Conclusion

PIXE serves as a niche analytical technique for trace element characterization in various sample types. Usually it is used by biologists for various plant tissue analysis.

I hope you enjoyed this post. More of them are coming!

stemq-concept2.png

Steem1.gif

StemQ Notice: This post was originally submitted on StemQ.io, a Q&A application for STEM subjects powered by the Steem blockchain.

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
Sort Order:  

Another interesting post.

I was wondering if you were going to create a post about cold fusion? :-)

Thank you.

Well there is not much to talk about really, as I dont really think (and fellow scientists agree with me) cold fusion is real.

Hi, @maticpecovnik!

You just got a 3.12% upvote from SteemPlus!
To get higher upvotes, earn more SteemPlus Points (SPP). On your Steemit wallet, check your SPP balance and click on "How to earn SPP?" to find out all the ways to earn.
If you're not using SteemPlus yet, please check our last posts in here to see the many ways in which SteemPlus can improve your Steem experience on Steemit and Busy.

YOU JUST GOT UPVOTED

Congratulations,
you just received a 11.84% upvote from @steemhq - Community Bot!

Wanna join and receive free upvotes yourself?
Vote for steemhq.witness on Steemit or directly on SteemConnect and join the Community Witness.

This service was brought to you by SteemHQ.com

Hi @maticpecovnik!

Your post was upvoted by @steem-ua, new Steem dApp, using UserAuthority for algorithmic post curation!
Your UA account score is currently 2.917 which ranks you at #11152 across all Steem accounts.
Your rank has not changed in the last three days.

In our last Algorithmic Curation Round, consisting of 201 contributions, your post is ranked at #72.

Evaluation of your UA score:
  • Only a few people are following you, try to convince more people with good work.
  • The readers like your work!
  • Good user engagement!

Feel free to join our @steem-ua Discord server

Congratulations! Your post has been selected as a daily Steemit truffle! It is listed on rank 3 of all contributions awarded today. You can find the TOP DAILY TRUFFLE PICKS HERE.

I upvoted your contribution because to my mind your post is at least 8 SBD worth and should receive 163 votes. It's now up to the lovely Steemit community to make this come true.

I am TrufflePig, an Artificial Intelligence Bot that helps minnows and content curators using Machine Learning. If you are curious how I select content, you can find an explanation here!

Have a nice day and sincerely yours,
trufflepig
TrufflePig

Fantastic presentation of PIXE that made me read about PIXE vs XRF

Well I am glad you liked it. Have you heard of it before? I know you are into microscopy and micro-PIXE is a sort of microscopy.

Posted using Partiko Android





This post has been voted on by the SteemSTEM curation team and voting trail in collaboration with @utopian-io and @curie.

If you appreciate the work we are doing then consider voting all three projects for witness by selecting stem.witness, utopian-io and curie!

For additional information please join us on the SteemSTEM discord and to get to know the rest of the community!

Hi @maticpecovnik!

Your post was upvoted by Utopian.io in cooperation with @steemstem - supporting knowledge, innovation and technological advancement on the Steem Blockchain.

Contribute to Open Source with utopian.io

Learn how to contribute on our website and join the new open source economy.

Want to chat? Join the Utopian Community on Discord https://discord.gg/h52nFrV