Hello friends, in this opportunity I want to share a pretty good and important content to you when doing maintenance to your personal computers or in your work, it is like Install a RAM Memory in a conventional Computer or in a Workstation, for Use of example use a Workstation Z640.
STEP 1:
Ensure that the computer is completely disconnected from the current (VERY IMPORTANT), we proceed to locate the equipment on a flat surface, it is best to be on a table. We remove the lid that covers the case to start working on it.
STEP 2:
We verify that WE ARE NOT USING any type of watch, chain or ring in our hands that prevent us from doing the job properly or causing any damage to the motherboard or other peripheral device. In the same way try to download as we always have a small static in the body that can burn some capacitor on the motherboard.
STEP 3:
Proceed to install the RAM memory card validating that the pins match the slot, (IT IS IMPORTANT TO KNOW WHAT TYPE OF RAM MEMORY USES EACH COMPUTER TO NOT DAMAGE THE MOTHER CARD, IN MY CASE DDR4).
WE PERFORM A SMALL PUSH AT BOTH ENDS OF THE CARD UNTIL YOU FIT IT CORRECTLY. (SHOULD A CLICK ON BOTH SIDES, THAT INDICATES THAT I ENTER PERFECTLY)
WE VALIDATE THAT THE TABS OF THE END ARE CLOSED AND HOLDING THE RAM MEMORY CARD.
STEP 4:
Finally we proceed to close the equipment with its lid and its security seal, we connect to the current and its I / O peripherals and turn on.
With this we will have finished a correct installation of a RAM Memory, it is always good to use new memories that assure a better functioning and a longer life in its use. Always remember to use your tools to perform a more efficient job.
I HOPE YOU HAVE LIKED, DO NOT STOP VOTING, COMMENT!
THANK YOU!!