An easy trick to charge a phone without electricity using razor blades

---

Most times we find it difficult to charge our phones when the battery is dead mostly because of lack of electricity or when our power bank goes down,we miss most important business because our phone battery is not powered ,but now am going to show you one fast way of charging our phones when the battery is dead…

(i) Get four different razor blades of the same made

(ii) Get a carton and measure the carton with razor and cut the carton to fit the blades

(iii) Get a tape and repeat what you did on the carton with it

(iv) The fourth thing to do is getting a bowl of “non concentrated sulfuric acid” not necessarily a bowl but you’ll need even if a little

(v) Pick up the cartons you cut and soak in the acid make sure the NCSA is all over the carton

(vi) attach the shaped carton to the blade and a thin shit of zinc or led or aluminum ranging from 0.5-1mm thick to the carton itself.

(vii) Attach the remaining cartons with the same procedures

(viii) Then tie it up together with a tape

(ix) Then attach a red and black wire representing positive and negative to it

(x) Read it with a meter, it reflects on the meter showing number ranging from 0.00-0.42 or more than

(xi) Get a spare usb,cut it and attach its wire to the wires on the carton and blade

(xii) Connect it to your phone ..your phone will start charging .

for a clearer understanding click the link to watch the step or you can use the charts below

---

---

---

---

---

---

if this was helpful please up vote and comment