Electricity-generating floors

on my occasion I will share information on the latest technology. (Floor Electic Energy Producer) is an electric generator that works by relying on a foothold where every time an object or object passes through this device it will turn on the motor. The motor is assigned to move the generator which from the generator itself will generate electrical energy, the electrical energy generated will be stored to the battery and from the battery will be used as output that can be used for other purposes.

For the development of this tool itself using various supporting components such as Arduino Uno as a microcontroller, PING sensor for the detection of objects or objects through this tool, DC motors and generators as a source of electrical energy, volt meter as a voltage generator generator, relay as a liaison and a circuit breaker on the battery and the balancer charger. For charging each battery it takes 5 minutes alternately for charging on each battery. As for the use of batteries in the development of this tool is still considered less for the capacity of power used and to overcome it all needed additional power or capacities on each battery to be used efficiently.

To charge the electric power generator equipment is still constrained during charging on battery 1 and battery 2. Where at the time of charging the battery acceleration and deceleration, when at the time of charging from 1-50%, experienced acceleration and when the battery is charged from 50-100% slow down for charging on battery.

Next picture

Follow @suhendra301061