Difficult conditions of a signal, such as a suddenly broken or non-existent cellular network capable of receiving calls at all, can be annoying. Moreover, if the incident happened at home, it would be very disturbing.
Actually, there are some things that cause the problem to occur, ranging from impaired operator service or network problems. However, it is possible that there is a problem in the device being used.
Well here's a simple solution for you who often experience hard signal in the house. What are the solutions? Check out the following way.
Open Window
One solution to overcome the difficult conditions of signal in the house is to open the window. Because, not infrequently difficult signals into the house because it is blocked by objects, such as glass or metal. Therefore, opening a window can be an easy solution to get a better signal. If troublesome, it could not hurt to move closer to the window when playing a smartphone to get a better signal.
Recharge Battery
Another cause of poor signal reception is the low battery life. In this condition, there are some smartphones that lower their performance to save power, including accessing the signal. Therefore, if the battery in your device has started to run low, immediately refill. Thus, the smartphone can get back to work as usual.
Do not cover the Smartphone Antenna
Before using the smartphone, there's nothing wrong to know the antenna position first. This can help you to locate the antenna, so as not to block it while in use.
On-Off Airplane Mode
In this way, the smartphone will refresh the network connection. So, the smartphone will look for other signals that are more easily contacted, so it is likely to find towers with stronger signals.
Replace the Operator
Sometimes the problem comes not only from your phone, but it's in the carrier you use. Because, there is a possibility that the operator you use less have a good network around the house. Therefore, be sure to check with others who have similar and different operators. Then, after finding a more suitable provider, you can simply replace it.