A little tutorial for Those Who want to create a PC at home and buy various online components.
1. The necessary parts are:
a pc case ATX / miniatx / itx
a power supply
a motherboard
a pair of ram
a hard disk
a dvd burner
a processor or CPU
a GPU or video card
Below the pictures with various assembly steps:
The power supply is usually already installed in homes, but if you have one with a wattage èpiù suitable to enter the first place it into the case.
Insert the CPU "processor" in the motherboard being very careful to include it in the right way with the arrow in the corresponding.
After attaching the heatsink on the CPU and stop it.
Place the hard drive in its slot connect power and communication cable.
Now insert the motherboard into the case, screw and connect the cables as shown in the instruction book.
Insert the RAM into the slots.
Insert the schda graphics or graphics cards, close the coupling tighten and then connect the power supply.
The DVD player can be inserted and connected at this point.
Close the side plate of the case and that's it.
You can connect all the current and by pc monitor and start all over.
If everything worked, insert the operating system installation disc and restart the PC to start the installation.
Follow the instructions that are displayed on the screen to complete the installation.
After starting the operating system, install all the drivers provided by the manufacturer of the components present in the relevant boxes.
Once you finished you are fully operational.
Good job !
thanks for the tutorial
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit