FML... My Damn Witness Crashes During Restart.. HELP

Having a hell of a time getting my witness server to restart.. It's a 64GB RAM system and was previously running just fine until my hosting provider decided to restart my server with little notice.. I've never had the issue of it just stopping like this without reason before and while I believe I have enough RAM to run a witness server it seems I'm still having insane difficulty getting this thing going... D:

Any of the other witnesses out there mind helping me out?

My config.ini is posted below for your viewing pleasure:

# Endpoint for P2P node to listen on
# p2p-endpoint = 0.0.0.0:2001

# Maxmimum number of incoming connections on P2P endpoint
# p2p-max-connections =

# Shared file size
shared-file-size = 60G
shared-file-dir = /shm/

# A 2-precision percentage (0-10000) that defines the threshold for when to 
# autoscale the shared memory file. Setting this to 0 disables autoscaling. 
# The recommended value for consensus node is 9500 (95%). Full node is 9900 (99%).
shared-file-full-threshold = 9500

# A 2-precision percentage (0-10000) that defines how quickly to scale the shared memory file. 
# When autoscaling occurs, the file's size will be increased by this percentage. 
# Setting this to 0 disables autoscaling. The recommended value is between 1000 and 2000 (10-20%).
shared-file-scale-rate = 1000

# Target blocks to flush
flush = 100000

# P2P nodes to connect to on startup (may specify multiple times)
p2p-seed-node = anyx.co:2001                        # @anyx (CA)
p2p-seed-node = gtg.steem.house:2001                # @gtg (PL)
p2p-seed-node = seed.steemnodes.com:2001            # @wackou (NL)
p2p-seed-node = 192.99.3.29:2001                    # joseph
p2p-seed-node = 5.9.18.213:2001                     # pfunk
p2p-seed-node = lafonasteem.com:2001                # lafona
p2p-seed-node = seed.rossco99.com:2001              # rossco99
p2p-seed-node = steem-seed.altcap.io:40696          # ihashfury
p2p-seed-node = seed.steemfeeder.com:2001           # au1nethyb1
p2p-seed-node = seed.roelandp.nl:2001               # roelandp
p2p-seed-node = steem.global:2001                   # klye
p2p-seed-node = seed.esteem.ws:2001                 # good-karma
p2p-seed-node = 176.31.126.187:2001                 # timcliff
p2p-seed-node = seed.thecryptodrive.com:2001        # thecryptodrive
p2p-seed-node = steem-id.altexplorer.xyz:2001       # steem-id
p2p-seed-node = seed.bitcoiner.me:2001              # bitcoiner
p2p-seed-node = 104.199.118.92:2001                 # clayop
p2p-seed-node = seed.steemviz.com:2001              # ausbitbank
p2p-seed-node = steem-seed.lukestokes.info:2001     # lukestokes
p2p-seed-node = seed.blackrift.net:2001             # drakos
p2p-seed-node = node.mahdiyari.info:2001            # @mahdiyari (NL)
p2p-seed-node = steemseed-fin.privex.io:2001        # @privex (FI)


# Pairs of [BLOCK_NUM,BLOCK_ID] that should be enforced as checkpoints.
# checkpoint =

# Endpoint for websocket RPC to listen on
rpc-endpoint = 0.0.0.0:8090

# Endpoint for TLS websocket RPC to listen on
# rpc-tls-endpoint =

# The TLS certificate file for this server
# server-pem =

# Password for this certificate
# server-pem-password =

# Block signing key to use for init witnesses, overrides genesis file
# dbg-init-key =

# API user specification, may be specified multiple times
# api-user =

# Set an API to be publicly available, may be specified multiple times
public-api = 

# Plugin(s) to enable, may be specified multiple times
enable-plugin = witness

# Defines a range of accounts to track as a json pair ["from","to"] [from,to)
# track-account-range =

# RPC endpoint of a trusted validating node (required)
# trusted-node =

# Track market history by grouping orders into buckets of equal size measured in seconds specified as a JSON array of numbers
bucket-size = [15,60,300,3600,86400]

# How far back in time to track history for each bucket size, measured in the number of buckets (default: 5760)
history-per-size = 5760

# Defines a range of accounts to private messages to/from as a json pair ["from","to"] [from,to)
# pm-account-range =

# Enable block production, even if the chain is stale.
enable-stale-production = false

# Percent of witnesses (0-99) that must be participating in order to produce blocks
required-participation = 33

# name of witness controlled by this node (e.g. initwitness )
witness = "klye"

# name of miner and its private key (e.g. ["account","WIF PRIVATE KEY"] )
# miner =

# Number of threads to use for proof of work mining
# mining-threads =

# WIF PRIVATE KEY to be used by one or more witnesses or miners
private-key = 5J2ATHISISMYPRIVATEKEYMANYLIKEITBUTTHISONEMINEtQwsk

# Account creation fee to be voted on upon successful POW - Minimum fee is 100.000 STEEM (written as 100000)
# miner-account-creation-fee =

# Maximum block size (in bytes) to be voted on upon successful POW - Max block size must be between 128 KB and 750 MB
# miner-maximum-block-size =

# SBD interest rate to be vote on upon successful POW - Default interest rate is 10% (written as 1000)
# miner-sbd-interest-rate =

# Console appender definition json: {"appender", "stream"}
log-appender = {"appender":"stderr","stream":"std_error"}

# File appender definition json:  {"appender", "file"}
log-appender = {"appender":"p2p","file":"logs/p2p/p2p.log"}

# Logger definition json: {"name", "level", "appender"}
log-logger = {"name":"default","level":"debug","appender":"stderr"}
log-logger = {"name":"p2p","level":"warn","appender":"p2p"}

Does anyone see any errors in the damn thing above that would be vexxing me when I try to run this thing? I'm absolutely perplexed as to what the hell is going on with this thing.. :/

---

VOTE @KLYE FOR WITNESS!

_{Every Single Vote Helps, Thanks for the Support!}

●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Need to get in Contact with KLYE?
Join the Official #KLYE Channel on Steem.Chat