Hardfork 17 has been very controversial. Despite this, I've produced a docker image for v0.17.0 for those who do want to upgrade, however it was postponed today. There may have been bug fixes, memory improvements etc. so you can still upgrade if you want without any negative effects.
This article is a technical article intended for those administrating STEEM servers, including seed nodes, witnesses, and RPC nodes. In layman terms, this article is explaining a piece of software written by myself designed to assist others with setting up STEEM servers (e.g. witnesses).
Are you looking for a new hosting provider? @Privex are offering low-cost dedicated and virtual servers with a 100% Block-Miss SLA for witnesses (we pay you $2 for every block miss caused by our service). Message me on STEEMIT.CHAT or email sales [at] privex.io
(We accept STEEM and most other cryptos, as well as PayPal)
What is Steem-in-a-box?
Steem-in-a-box (or just SIAB for short) is a small piece of software I wrote for deploying STEEM nodes (and GOLOS), it is updated alongside my docker images. SIAB is used by quite a few witnesses including myself @someguy123, @chitty, @arcange, @thecryptodrive and many more due to it's ease of use.
Technical details: SIAB is a set of bash scripts which assist with deployment of the STEEM docker images which I create, source available here: https://github.com/Someguy123/steem-docker
Since I never properly explained the "SHM Fix" in a single up to date guide, I've decided to include an up to date fresh install, and upgrade guide for Steem-in-a-box (for witnesses)
If you're upgrading, skip to the bottom of this article for upgrade instructions from HF16
Fresh install
Be aware that docker is a virtualisation technology, which means it's completely safe to run each command as root, since the container will be fully isolated from your system once it's running.
First, install docker if you don't already have it:
apt update && apt install curl git
curl https://get.docker.com | sh
Now, download Steem-in-a-box from my Github:
git clone https://github.com/Someguy123/steem-docker.git
cd steem-docker
The core of Steem-in-a-Box is run.sh
. This is a BASH script which abstracts all of the docker magic, making it easy to deploy a docker-ized STEEM container, without needing to fully understand docker.
Run the following command to download the latest copy of STEEM from my DockerHub:
./run.sh install
Now you should have a ready-to-go Steem-in-a-box. Let's configure it
If you're a witness, you'll need to add your name and private key to the config.ini
, as well as adjust the shared memory size depending on how much RAM you're willing to give it.
Open data/witness_node_datadir/config.ini
, and adjust the size of the shared memory file as needed. 8GB is the minimum for a witness, 12GB is the default and recommended if you have enough RAM for that.
# Remember to comment out p2p-endpoint and rpc-endpoint if they're not needed
# p2p-endpoint is for SEED nodes, rpc-endpoint is for RPC's but it also allows inspection
# of your witness's synchronization state
shared-file-size = 12G
# If you want to use the disk instead of memory, change to /steem/ instead of /shm/
shared-file-dir = /shm/
Now, make sure you adjust the /dev/shm
size to the size you put in the config (preferably bigger). If you don't have enough RAM for this, you should reduce the shared memory size or you'll risk missing blocks. You may be able to get away with using SWAP, however I cannot guarantee that you won't miss blocks if you do that.
# Adjust /dev/shm to 13gb
./run.sh shm_size 13G
Configure for a seed
A seed is a type of STEEM node which distributes blocks, and broadcasts transactions to other nodes on the network. It's similar to a Bitcoin Full/Supernode. It does not "mine" or "witness" blocks.
Steem-in-a-box comes preconfigured as a seed, and will automatically attempt to expose PORT 2001 to the world. You DO NOT need to follow the instructions below unless you want to change the port.
Optional: Change the Steem-in-a-box seed port
If for some reason, you don't want to use 2001, you can change this. Edit the file data/witness_node_data_dir/config.ini, and change 2001 to some other port, let's say 2005
p2p-endpoint = 0.0.0.0:2005
You'll also need to create a file in the same directory as run.sh
, called .env
, this is a file used by Steem-in-a-box to determine custom settings for docker. Put the following in the file:
PORTS=2005
This tells it to forward port 2005 from docker, to your public IP address.
Configure for a Witness
A witness is a special type of STEEM node which produces blocks, similar to a miner. You can read more about what a witness does in my article: Seriously, what is a STEEM witness? Why should I care? How do I become one? (Answer)
To start, create a file in the same directory as run.sh
, called .env
, this is a file used by Steem-in-a-box to determine custom settings for docker. Put the following in the file:
PORTS=
DOCKER_NAME=witness
By leaving the PORTS blank, this prevents it attempting to forward any P2P ports. We also change the name of the docker container, this prevents confusion when you're managing both a seed and a witness, as the container will be correctly named "witness".
By setting up a witness, I assume that you're aware of the security concerns, and basic procedures for running a witness, so I will explain them only lightly.
Edit data/witness_node_data_dir/config.ini
, disable the p2p-endpoint, and fill out your witness details. By default I already disable account_history and all of the other plugins/apis not useful for witnesses/seeds
# p2p-endpoint =
witness = "someguy123"
private-key = 5JiHZCzXmAhyezYrvSdBu8587YVPPvAnCp5Nx14tJPzGx6MDg4M
Starting the server
Once you've configured Steem-in-a-box to your requirements, you may start the node with:
./run.sh start
You can check the status of it with ./run.sh status
, and ./run.sh logs
You should see the node syncing in the logs. Once it's fully synced, you're ready to go!
UPGRADING FROM HF16
For those of you with an existing HardFork 16 installation (of steem-in-a-box), the following instructions will get you up to date:
Disable your witness, or change it to your backup key
./run.sh wallet
locked>> unlock "supersecurepassword"
unlocked>> update_witness "someguy123" " " "STM1111111111111111111111111111111114T1Anm" {"account_creation_fee":"30.000 STEEM","maximum_block_size":65536,"sbd_interest_rate":300} true
Now stop the witness server
./run.sh stop
Delete any old leftover docker containers
docker rm {seed,witness}
Now, make sure you delete the /dev/shm
files, as they will not be compatible with HF17 and need to be re-built
rm -rf /dev/shm/*
Finally, upgrade your steem-in-a-box, then start it with replay
git pull
./run.sh install
./run.sh replay
You can now check the logs with ./run.sh logs
and see that it's rescanning the blockchain. Once it's fully replayed, you can re-broadcast your witness :)
Tired of missing blocks? @Privex are offering low-cost dedicated and virtual servers with a 100% Block-Miss SLA for witnesses (we pay you $2 for every block miss caused by our service).
Message me on STEEMIT.CHAT or email sales [at] privex.io
(We accept STEEM and most other cryptos, as well as PayPal)
I tried installing a Steem node a few weeks ago without success. every time I restarted it it would get stuck syncing and would not complete. I'll try SIAB. Thank you!
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Hi Camb, How did your installation of SIAB go.. I just setup mine up and was able to sync under a day.. Now I am not sure what to do next.. my account on https://steemd.com/@mattgimel.. still now mined: false.. Now sure when my server will start processing blocks or am I missing a step. ??
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Now that is customer service,...
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit