SLC S22W2//Basic clothing pattern for children

---

Measurements I am using

---

Outer length - 50 cm
Height Waist length or depth - 14 cm
Hip circumference - 56 cm
Waist circumference - 48 cm
Knee circumference - 28 cm
Hem circumference - 30 cm

---

Tracing front pattren

---

Step 1: Drawing Rectangle

If I talk about step one then you need to draw a rectangle which should have 50 cm outer length and total with of 14 cm which is 4th part of total circumference of hip that I have taken as 56 cm.

Step 2: Marking Points

If I talk about step 2 then it is all about marking points in which above I have marked point ABC and D at corners of rectangle.

Front pattren pointe marking

• I have started from point A to point D and we should move down to height of shot by 14 cm which is length or depth of waist which I have marked as point 1 at both sides.
• I started from point B two point A and there I enter the 1 cm which I marked as point 2 and then from point 2 to A I have measured 12 CM which is 4th part of waist circumference that I have taken as 48 cm.

• I have measured now way in between A and 1 line and this is point 4. I have divided line number 1 into line 4 and then line 1 is extended and then I have marked a line which goes up at point A and this is I have marked as 5.a
• I have divided line between 5 and 1 and then I have transferred result to hem line which is present between D and C.

• I have taken measurements of 9 5 and add 5 cm in it starting from hem line in up direction which I named as point 7.
• I take measurements of 7 cm which is fourth part of circumference of knee and total circumference is 28 cm from which I minus 1 cm from point number 7 from each end and these points I have named as point number 8.

• I have taken measurements of 7.5 cm which are almost half of circumference of hem and then I minus 1 cm from 6 point at each end and this is I named as point 9.

Connecting Points

• I have connected first 2 with 5 in straight line and then 3 with in slight curve.

• I have connected 5 with 5.a in deep curve and then 5 with 8 in a straight line.

• I have connected 8 with 9 in a line which is straight and then 8 with 1 in side seam.

---

Tracing back pattern

---

Back pattern marking

• I take measurement of height of shot from A to D that is 14 cm and I marked at both sides as point 1.
• I add 2 cm from point A to B and this is I marked as point 2. From to I move up and I go 2 cm out of box or rectangle which I marked as point 3.
• I take measurements from 3 to B in inclined way and 4th part of waist circumference I measured in which I added 2 and this is I marked as point 4.

• I take measurements of half of line which is 7 cm got by dividing 14/2 and I marked at that line that was going towards A which is marked as 5.a

• I take measurement of line present between point 5 and 1,I took half 21/2=10.5 cm and then marked and transferred it at DC line which hem of trouser or pant.
• I take measurement of line 6 which is around 10.5 cm and then I take it's half which is 5.25 cm after that I added 5 cm in it which is 10.25 cm. For taking measurements I see line DC and I locate point number 7 from 6 in upward direction.
• I marked point 8 by taking fourth part of knee contour and by adding 1 cm in it and then distributing point 7 to each side.

• I take point 6 of hem and I measured fourth part of hem circumference and distributed from 6 to each side and this is i marked as point number 9.
• I made half of line between 4-3 and I move down 6-7cm from that point for having point number 11 for adding dart.

Connecting Points

• I joined 3 with 5 in straight line and 3 with 4 again in straight line. I also joined 5 with 5.a in deep curve.

• I joined 4 with 8 in straight line and 8 with 9 in straight line again which is up to hem. I joined 5 with 8 in straight line for crotch.

• Then 8 with 9 with straight line from crotch. And at last I made clamp by joining 10 with 11 in straight line.

---

Transformation

---

Front Pocket and Flap

If I talk about creating of a front pocket and flap for a pair of pants then following things needs to follow;

• If I talk about most important thing then this is length of Tab which should be little more longer than clasp like if clasp is around 8 cm then tab should be 10 cm.

• If I talk about width of tab then if at one side of Tab is around 2 cm then other side is 4 cm.
• if I talk about width of pocket then it is drawn from crotch to waist with 10 cm width.
• If I talk about opening of pocket then this is made 4 cm from 3 to A point.

Back Pocket

For creation of back pocket you need to follow following steps steps;

• If I talk about location then you should start at point number 10 and then 4 dimensions of pocket you need to measure 6 cm at 8 side and 15 cm in length.

• if I talk about shape of pocket then I created it in square shape as I want to achieve a rectangular shape of pocket.

I want to invite @muhammad-ahmad,@jyoti-thelight,@steemdoctor1