Welcome again, so now let me tell you the flat piece, okay before we put on the flat blends cover we're going to click in our wand and it just snaps right in right, and then here is the blanc's cover and remember when I said earlier you're going to have those little plastic clips and it's just going to go right in the center like that and it's just going to clip in and there you go and that's it. Now my blind window is exactly the exact width, so I don’t have any space usually you'll put like a little casing thing on the side just to give it that seamless look. I’ll tell you the one that I did downstairs but I plan on putting a curtain up here. So I'm not too worried about this I may not even I may eventually take these off and not even have this but I'm just gonna have this there. For now, hold on then with your cordless blinds, you just put it down like this. Now if you want if your blind is too long if it's too long on the bottom you can cut it. So you wouldn't have all these gatherings here so I may just take one or two of these. I'm not pressed to do it right now but yeah so these are your cordless blinds see how easy that was and that's how you install blinds super easy. Let me show you those extra little pieces that we have them, so see it's like a little extra corner and he was able to give that nice seamless look.
Just so you won't see the side of the blind just to give it that more nice cleaner look. I was able to do it above my kitchen sink and my back patio door and yeah so here's the little extra pieces right here and let me tell you what these three are storming outside. So these are the sides right here get this right here and the little corner right here you just slide it in like that’s all and it's kind of hard but just slide it in like that and then what you'll do is slide it in right here like that. Now I wasn't able to do this side because the c is so tight. It doesn't fit but I plan on doing something else right here. So yeah that's kind of cool right there now these extra little screws and this clear little bracket so these two screws what you do is to secure your blind if you don't want it to be moving you'll just see this little hole right here. So you'll put this little bracket you'll stick that in the hole like that and you will screw this to the door like that so that way when you're opening and closing the door, it won't flap and keep making noise. It'll just be secured right in there so I plan on doing that later and yeah it's that simple it's really really that simple. It's not hard to do so yeah you don’t have to pay anybody to do this. For you just do it yourself. That’s all, thank you.