Hello Fellow Steemians!
I have a new update for the trailer project building forms that will be used to create an aircrete hexayurt.
I started by laying out a 2x3" board to use for the outside form of an 11/32" plywood.
I cut the length of the 2x3" board to 8'&6".
I used 2.5" deck screws to fasten the frame to the plywood.
I used a framing square to get my board to an approximate squareness.
I fastened the board with one screw initially to ensure my square.
I cut this middle board to 3'10".
Using a chalk line I drew a diagonal on another 11/32" piece of plywood.
Using my jigsaw i cut along the diagonal line.
This will create the roof section of the mold.
Here is the layout for the roof section of the mold. I attached the 2x3" boards to the plywood about 1/4" inward from the edge of the plywood.
I used some 6mil plastic to place over top of the mold which will act as a release for the aircrete after its cured.
Here is the layout before the aircrete has been poured.
Thank you for your time if you gave this a read!
So, the aircrete will be thin slabs when it sets up?
I haven't seen this done before, so it should be quite interesting to follow.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
I was thinking the same thing.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Likewise! I am looking forward to learning something new here.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Exactly, This is experimental, we'll see how well it works out.
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
It looks like you are going to make two separate panels, one rectangle and one triangle. Do you use the rectangular ones for walls and the triangular ones for the roof? How to you attach them together?
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Correct, aircrete can be drilled into. I will create 6 of these sections and assemble them. I will probably use deck screws and duct tape. I believe this is possible and am going to experiment building a yurt shelter this way.
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
What about rebar, remesh, or some other reinforcement? Steel reinforcement is great until it starts to corrode. In a thin section that would probably be right away. I've thought about using something like fiberglass window screen. That stuff is very strong for its weight. If you could get a fiberglass mesh that was coarse like hardware cloth that would be perfect.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
This is the stuff - heavy duty fiberglass stucco mesh.
https://www.homedepot.com/p/BOEN-FiFlexMesh-10-oz-38-in-x-75-ft-Heavy-Duty-EIFS-Stucco-Mesh-EF-387510/204836489?cm_mmc=Shopping%7CG%7CBase%7CD29A%7CMulti%7CNA%7CPLA%7CMajor-Appliances%7CSpecial-Buys%7c71700000032418849%7c58700003842365800%7c92700030987191770&gclid=EAIaIQobChMIu6nBtPDg3gIVgWSGCh2jXA5eEAkYCiABEgLwTvD_BwE&gclsrc=aw.ds
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Excellent suggestion sir!
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
howdy sir makinstuff! hey what in the world is aircrete? lol.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
It's a lightweight concrete made using a stable soapy foam to produce a lightweight, fireproof, insulating, rot proof material.
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
howdy today sir makinstuff! wow that sounds like a wonder material, is that a new invention?
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Hey @janton good sir, there have been several people using the material to create some dome structures. This will be a first if I can successfully cast and build a yurt structure this way.
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
howdy again makinstuff! oh are people making houses out of this? I guess I should google it. If it's light weight and super strong then you'd think they would build houses with it.
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
Indeed, check out https://www.domegaia.com/ they have pioneered building dome houses with aircrete and created a low cost DIY foam generator kit for people to get started making their own aircrete.
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
oh how cool! thank you sir makinstuff!
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
You bet fine sir!
Posted using Partiko Android
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit
This project is being supported by @Fundition
Fundition is a next-generation, decentralized, peer-to-peer crowdfunding and collaboration platform, built on the Steem blockchain.
#upfundition and #fundition tags on Steem represent the projects that are started on https://fundition.io.
Are You Prepared to Make the World a Better Place too?
Read the full details of Fundition Fund program
Learn more about Fundition by reading our purplepaper
Join a community with heart based giving at its core
Downvoting a post can decrease pending rewards and make it less visible. Common reasons:
Submit