Greetings to you all my fellow ladies welcome to my blog, today I want to show you guys how to cut and sew jumpsuit

Measurements

shoulder	16
shoulder bust	10
under bust	14
half length	18
half length waist	33
lap1	33
lap2	17
hips	44
trouser length	39

I fold the fabric into two then I mark the crust line which is 11 then I places my tape they at were I mark the crust line and took the lap 1 measurements which is 33 so I divided it by 2 then I mark it , then I mark the length then I places my tape at were I material knee measurements and took the lap 2 measurements which is 17 I divided it by 2 which is 8 and half then I move to the base the base measurements is 11 so I divided it by 2 which is 5 and half then I mark the waist measurement so I divided it by 4 which I 8 then I add sewing allowances then I connect it by together then I cut it out

The next thing is to cut the upper side so I lay the fabric then I mark the bust point under bust, bust to bust and half length .then I use a cup bra to create a bust

This is the bra cup

So I use the bra cup to create a the breast so I places the bra cup at were I mark shoulder bust then I use a pen and draw it and fellow the bra shape then I carry it up and and deduct 1 and half inchy from the under bust then at the bust area I mark half and inches then I curve it and connect them together then I mark the half length waist the I connect them together and cut it out

then I cut the breast paded I fold the fabric then I places the bra cup at the centre the I draw the line straight then I mark 1 inches at the upper side then 1 inches at the down side then I connect them together and cut it out

Then I join it together then I cut a stair and stair it on the fabric then I iron it after that I put the bra cup at the middle of the fabric the I sew it all round as you can see in the picture below

Then I used a white material to design the breast and it looks more beautiful, I place the material at the bust point and at the middle of the breast then I sew it after that I cut a lining and do the same thing then I don't both the two side of the breast

The next thing is to join the two breast in it places then I first of all use a plain material and design the front part then I join the breast in it places the I use a lining and turn it to the positive side then I sew the back and hold the dart at the back then I places the front on-top of the back then I took her bust measurements which is 38 so I divided it by 2 thich is 19 inches then I move to the under bust waist Measurements , I mark her under bust then at were I mark under bust waist then I divided it by two and mark same think in the half length then I sew it straight then I cut the half length and it ready to join it with the down part

I join it with the down part, now I want to cut the selves, I cut the material straight then I mend it half and inches then I use half inches elastic to pass it at the edge both the two side then I pull it and it was folded then I sew it 2 inches and turn it to the positive side

Then I join it in the dress after that I iron it, this is the finished results.

Thank you all for going through my post, please if you have any questions please drop it at the comments section