Hope everyone is well, by the grace of Allah I am also well, today is Monday (Date: 06-01-2025) I am working on CCM Mechanical Blower Sepe. I will share with you what is the problem with sape. I hope you understand, anyway let's start.
First I go to the place of work with the equipment in hand. I took the equipment (mould, hammer, fiber wrench, sewing wrench, screwdriver, grinding machine) etc. and started working. First of all, I remove the blower belt. B-64 belt number. Then I remove the 16 mm 3 inch nut bolt of the guide or base. After opening, I take out the blower fan. I use a sewing wrench to open the fan. There was a 25 mm nut in the fan. It was very difficult to open the nut, so I soaked it with a little diesel. Then I was able to open it. After opening, I brought down the blower housing bearing sape everything.
I brought it down and cleaned the place. Then I opened the planchette of the blower housing with the equipment. Then I opened the bearing from inside the sape. There were 2 bearings in the housing. Bearing number 6309. It was a little difficult to open the bearing, so after giving it a few blows with a hammer, it opened. The bearing came out of the housing easily. The size of the sape is 600 mm. The diameter of the sape is 50 mm. There is a key and a 10 mm key. The bearing point of the sape has been damaged a lot. This sape has been removed and it is not possible to operate it by welding. So I am taking the sape to the workshop of a skilled craftsman saper. I have given them a drawing of the sape. They will make a new sape. When it is finished, I will put the bearing 6309 and fit it.
Thus, I worked on the blower today. And I love to work hard. I never neglect my work. I always work with attention. I want to achieve my success in this work.