SLC-Home Repair Club ||S23W3|| Tutorial: Changing a two-pin socket, even making new connections in the correct order, step by step.

Hello Everyone
This is @sushanta83 From #Bangladesh

Thumbnail Image GridArt

Hello Steemian friends, how are you? I hope you are very well by the grace of God. By your prayers and the grace of God, I am very well. Today I am presenting a new post to you. My new post today is that there is only one two-pin socket in an old electrical board that is broken and I am presenting several practical examples to you. Today I will observe with you how I connected a new two-pin socket. This board is very connected and practical inside my house: Two-pin socket is very important to me. With the help of this socket, various types of cables can be connected to the charger: charger, mobile charger, light charger.

@rmm31, @imranhassan I am especially happy that this kind of competition and the opportunity to develop myself and present myself as a new talent. So today I am going to share with you the process of making a new **Two-pin socket** in my house. I've been deciding to fix this board for a few days now, but I can't seem to find the time. I hope you'll stick with me and check out the post, so let's get started without further ado.

Step-1

I usually don't connect the line from this board, because I don't have to connect from here. Suddenly I need to use one of the top in sockets on this board to charge the light. So today I will suddenly use the port to charge a charge. In the meantime, I noticed that the line is not getting through, so I will disconnect the line connection with the help of a tester. In the meantime, I checked and found that there is no connection in the socket. That is, after recharging a little, I realized that there is a problem in the connection inside the board or the two-pin socket is damaged.

Step-2

Then I removed the fuse on the main board. The purpose of removing the fuse is to disconnect all the line connections on this board and no line connection will be possible. Of course, this type of work has to be done very carefully. So I will be very careful when doing this type of home electronics work. I have already been able to remove all the screws on the board with a tester.

Step-3

Then I removed all the screws of the board in a short while and saw that the inside was very dirty. Then I cleaned the dirt with a cloth first. Then I noticed that the earthing line at the base of one of the two nuts in the two-pin socket had come loose and was also damaged from the inside. From there, I took out the wire and cleaned it very nicely by putting rubber on the wire.

Step-4

_{I have purchased a new two-pin socket from the market.}

‍

Then I removed the screws from the damaged socket from the board in a short while and am in the process of installing a new socket. I installed the new socket in a short while. Then I tightened the screws with a cutting pliers in a short while. The reason for tightening the screws is that the amount of force that will be applied from the outside to the charger plug will cause the socket to be damaged very quickly even if it moves. So I tightened the screws.

Step-5

	Complete with electrical wiring inside the two-pin socket

	The line is correct👍

I have already connected all the lines and then tested all the screws on the board. Then I planned to charge the Airbus Bluetooth charger with a mobile charger in a while. Then I started connecting and found the lines to be completely correct. This was the electrical vote of my house, in which the two-pin socket was damaged and I connected the two-pin socket again according to the correct rules.

There was only one socket inside the board and it was broken from the inside He was ruined

I am very happy to participate in this competition.So I am very happy to participate in such a beautiful competition I invite my friend @wilmer1988 @radjasalman @patjewell @pandora2010 and @f2i5 to participate in this contest. I hope you all will participate in this contest.

Thank you very much for reading my Blog♥️