My Mother and My Aunte Working for our Cabinet to putting Varnishing and Color

Good day steemians friends!!!
My mother and my aunte working together for this cabinet.

STEPS and PROCEDURE
Materials
(shure tite,sanding paper,and knife palet)
1.Put the shure tite on the hole of around the cabinet .
2.Sanding the wood of the cabinet all around in the top,front,back and side by side.
3.After the put shure tite on the hole of the cabinet and sanding the wood of cabinet then clean the dush all around of the cabinet to prefer next step or procedure.

This is example how to sanding the wood of the cabinet around.

My aunte mixing the color here are the materials how to mixing the color!
This are the materials.
1.Tainting color,yellow,red,black,brown,and wood stain.
2.1gallon of lacquer thinner,1bottle of lacquer flo
3.5bottle of sanding seller,and 2bottle of paint thinner
4.waste cotton
Mixing color
1canned of wood stain yellow color,and brown tainting color

After mixing the color proceed to the cabinet to put the color using waste cotton all around the cabinet below,front,back,and side by side and the top of the cabinet.

This is the examples how to put mixing color

After putting mixing color wait for a 20 minutes for dry the color.And after waiting for few minutes putting first,second,third in sanding seller to shine your cabinet.

After putting sanding seller and then dry for a few minutes after the dry polishing again the cabinet around using sand paper and after that using pencil and color to retouch the part of the cabinet who did not put the color. Finally put again in sanding seller for the last putting to the cabinet for purposely to very very shine of your cabinet.