HOW TO SEW CURTAINS

Hi steemit.
I want to share about how to sew curtains smoke ring easily. For you who want to beautify the house to look more elegant but do not want to spend a very expensive cost you can choose to make your own.

STEP 1:

Measure the width and length of the window you want to install the curtains.
Prepare the curtains in accordance with the wishes here I use a curtain with a width of 280 cm.

STEP 2:

Cut out the curtains as you wish. Because the width of the fabric is in use for the height of the window then we just count for the width of the window.
For example for window width 2 m I cut the cloth as much as 4 m cloth. So for one window I wear curtains as much as 2.8 m x 4 m.

STEP 3:

for the width of 4 meters fabric I wear smoke ring as much as 32 rings because for one meter of ring ribbon ring ring there are 8. Fold the smokering ribbon between the ring with no hook. This section will be used for the front of this curtain fabric to put smoke ring ribbon on the curtain fabric.

STEP 4 :

Scissor hard ribbon as wide as 10 cm in length adjusted with curtain fabric. If you want to make a curtain with a height of 2.5 m from the curtain fabric that is 2.8 m wide then 30 cm left so you can fold the curtains as much as 15 cm above and 15 cm below.

STEP 5 :

Position the smoke ring approximately 1 cm from the top of the curtain or in accordance with the width of the curtains that will be made. Push it neatly so that the stitches become more tidy.

STEP 6 :

Sew the bottom of the curtain neatly, after that sewing the left and right of the curtains try to sew neatly.

STEP 7 :

Cut the fabric on the ring hole of the smoke ring.

STEP 8 :

Pair the smoke ring ring on the smoke ring ribbon..and finish

thank you for visiting my blog. Do not forget continued support and follow me on posting to come. **

HOW TO SEW CURTAINS

Best Regards, @penjahit