Textile mills in our country are mostly unplanned due to which the reasons for environmental effects and production losses are due. Extending most of our factory gradually, due to which there is a lot of problems in the scales of the Finnish Goods on the floor of the machines and material transport.
Floor design scales should be taken into account:
- The Floor and Production Office and Lab should be well equipped to save time in time because the Lab Daddy Production Office should be running in the lab for the day lab, CMC, Run for the test.
- Glass lighting should be done occasionally in the floor for adequate lighting for the day light use. Lighting is a big problem on the production floor. Especially in the day.
- 100% mandatory over-exhaustive head expost on the machine that stops out, it is not possible to have moisture on the floor so that the environment becomes miserable.
- Time Saving for WASHORE Big Fact Production Floor, as far as the machine can and the more time that the time saving queues will be more.
- The floor will start with the batch section after which the docking machine will then have a slitter, aquarium, hydro extractor, then there will be the Swedish brush next to the stator AA, then the comforter side will have a trimble dryer, then the Inspection's Finnish Goods Store. That means that if the fabric is formed once, then it will not come back.
- To set up a machine in futures, the place will be left before. Auto Dispensor will be line-up for this.
- The stenter slitter screwer on the diving floor, the hydro extractor, which is in the floor water repplant, must have finished Finnish Acid Resistance.
- There should be adequate lighting system in front of the machine so that the padar, front is clear all day.
- There will be a separate place for Sthanter's non-conformed goodies, which can be returned once again and the time is lost for finding non-conformed goodies in Textile in Dai, and it is a random one.
- Dying's GM Manager Office will not have to run away so that the signature runs away.
- If the camera store is near the dining floor then it should be 100% Temperate Resistance Environment. Room has to be separated separately for diluting the chemical. Disease store will be separate from the chemical oxyllery store.
Air suction should be maintained through the natural ventilator on the floor.
To keep Floor Dust free, in the front of Stenter's front, compacting, brushing, swimming, and batch sections should be in the Central Dust Box.
- The compilation of the compilation will have to add where to stay for fire safety.
- Office of Inspection 100% must be done separately with AC, AC should be in it and the store will be good according to buyer.
- Have a central monitoring system.
- Machine-to-machine, machine-to-office LAN phone should be stopped so as not to run on the floor to give instructions.